WRAS Approved Water Fittings
Section 0140
Cisterns COLD WATER STORAGE AND LIDS - METAL
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.
Listing Number 0212087
`Braithwaite` range of rectangular, sectional cold water storage cisterns for potable water, constructed from externally or internally bolted to BS 1564 Type 1, hot pressed steel panels with strip rubber and extruded mastic strip sealant. Panels may be galvanised to BS EN ISO 1461:1999, or shot blasted to SA2½ and primed with International Interplate 170. Following installation tanks may be coated with WRc or DWI approved coatings.
Size: 1,634,260 L (1634.26m³).
Product Designation: `Braithwaite` sectional storage cistern.
Marking: Panel pressed with manufacturers registered trademark.
Installation Requirements : R001 R270 R280 R320 R330
Note:
Proviso:
Manufacturer: Braithwaite Engineers Ltd
List all fittings by this manufacturer
Factor:
Listing Number 0306098
Range of sectional cold-water storage cisterns having a maximum depth of 3 x 4 ft panels (3.66m) supplied with a flat steel (for indoor installation) or pitched roof. Assembled from bolted pressed steel flanged panels 4ft (1.22m) x 4ft (1.22m) or (1m x 1m square) jointed with rubber sealing strips. Units are supplied with manholes and/or ventilator cowls with rubber gaskets. Cisterns are coated internally with a suitable approved paint.
Size: 522.964.
Product Designation: BSI 564 Type 1.
Marking: Data plate on side of tank printed company name, size and capacity, site name. Panels marked HB.
Installation Requirements : R270 R280 R320
Note:
Proviso:
Manufacturer: Horseley Bridge Tanks
Section 0140
Cisterns COLD WATER STORAGE AND LIDS - METAL
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.
Listing Number 0212087
`Braithwaite` range of rectangular, sectional cold water storage cisterns for potable water, constructed from externally or internally bolted to BS 1564 Type 1, hot pressed steel panels with strip rubber and extruded mastic strip sealant. Panels may be galvanised to BS EN ISO 1461:1999, or shot blasted to SA2½ and primed with International Interplate 170. Following installation tanks may be coated with WRc or DWI approved coatings.
Size: 1,634,260 L (1634.26m³).
Product Designation: `Braithwaite` sectional storage cistern.
Marking: Panel pressed with manufacturers registered trademark.
Installation Requirements : R001 R270 R280 R320 R330
Note:
Proviso:
Manufacturer: Braithwaite Engineers Ltd
List all fittings by this manufacturer
Factor:
Listing Number 0306098
Range of sectional cold-water storage cisterns having a maximum depth of 3 x 4 ft panels (3.66m) supplied with a flat steel (for indoor installation) or pitched roof. Assembled from bolted pressed steel flanged panels 4ft (1.22m) x 4ft (1.22m) or (1m x 1m square) jointed with rubber sealing strips. Units are supplied with manholes and/or ventilator cowls with rubber gaskets. Cisterns are coated internally with a suitable approved paint.
Size: 522.964.
Product Designation: BSI 564 Type 1.
Marking: Data plate on side of tank printed company name, size and capacity, site name. Panels marked HB.
Installation Requirements : R270 R280 R320
Note:
Proviso:
Manufacturer: Horseley Bridge Tanks
댓글 없음:
댓글 쓰기