WRAS Approved Water Fittings List

WRAS Approved Water Fittings

Section 0120

Cisterns Storing Water for Domestic Purposes

DRINKING, WASHING, COOKING AND SANITARY
Cisterns in this section comprise units which include all the essential items identified in Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.
Listing Number 0605131

Aquastow` range of GRP sectional, cold water storage cisterns and covers. Units are constructed of panels (1m x 1m or 0.5m x 1m) manufactured from hot press moulded GRP, corner sections and stainless steel bracing. Roof covers are constructed from panels of the same manufacture and are provided with a manhole cover. Joints are sealed with Butyl sealant and secured with galvanised or stainless steel bolts. Cisterns are fitted with screened air inlets, screened warning and overflow pipes (can be supplied with an `AB` air gap).
Size: 228,000 litres.
Product Designation: `Aquastow` hot press moulded sectional GRP cold water storage tanks.
Marking: Aquastow, AC Plastics Industries Ltd, capacity, printed on adhesive label attached to outer panel.
Installation Requirements : R001 R270 R280 R350

Note:
Proviso:
Manufacturer: A.C. Plastic Industries Limited
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0706067

`Balmoral M100-B30` range of hot press moulded GRP sectional, pre-insulated panels, for the construction of cold-water storage cisterns. Assembled panels are sealed with extruded butyl rubber. The cisterns are fitted with uPVC roof struts to support the roof panels. Galvanised steel struts internally brace them with stainless steel ties externally. The cisterns are provided with wholesome water storage kit consisting of a screened air inlet screened warning pipe and a screened overflow (where applicable). The roof structure is fitted with one or more sealed manhole access points, mounted either directly on the roof structure or fitted into a float operated valve housing. Nuts and bolts in contact with water are stainless steel.
Size: 1000 - 448,000 litres capacity.
Product Designation: Balmoral M100-B30.
Marking: Balmoral Tank, logo and contact information moulded into panels. Balmoral Tank, logo, date of manufacture and capacity printed on adhesive label attached to panel.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Balmoral Group Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0605132

Range of rotationally moulded high-density polyethylene storage tanks. The polyethylene cisterns are fitted with tight fitting lids, screened air inlets, screened warning pipes and overflow. Can be supplied without fittings and fixtures.
Size:
Product Designation: LP1250WST, H3500WST, V1365WST, V1800WST, V2600WST, V3635WST, V5455WST, V7270WST and V10000WST.C1365, C1800, C2600, C3635, C5455, C7270, C10000, C15000, C20000, C25000, C30000, C35000, CH1500, CH2000, CH3500, CLP1250, CSL1000, CSL1250.
Marking: Balmoral tanks installation guide and product information printed on adhesive label attached to outer panel.
Installation Requirements : R001 R270 R280 R350

Note:
Proviso:
Manufacturer: Balmoral Tanks
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0503111

`Decca One Piece` range of GRP one-piece cold water storage cisterns and covers. Tanks are manufactured from glass-reinforced plastic and covers are sealed with WRAS approved polyethylene/butyl seal. The cisterns are supplied with screened air inlet connecting kits and above 1000 litres an inspection hatch is provided. They are supplied either un-insulated or pre-insulated. For a full product range see manufacturer`s catalogue.
Size: DP10-DP26, M1-M16, CM01-CM24, TP10-TP26.
Product Designation: Decca One Piece, Decca Two Piece.
Marking: Adhesive label with Decca Plastics, address, model and trade name and certification number.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Decca Plastics Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0507099

Range of one-piece GRP cisterns and lids for domestic cold-water storage. Units can be pre- insulated with polyurethane foam and are supplied with a wholesome water kit consisting screened air inlet, screened warning pipe and close fitting vent pipe grommet. Cisterns above 200 litres are fitted with an inspection hatch. Capacity range 30L - 4500L.
Size: 30 litres - 4500 litres.
Product Designation: A, B, C, D, E, F, G and H ranges.
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270

Note:
Proviso:
Manufacturer: Dewey Waters & Co Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0507097

Range of GRP sectional, cold water storage cisterns and covers. Units are constructed of panels (0.5m x 0.5m, 1m x 0.5m, 1m x 1m or 4ft x 4ft, 4ft x 2ft, 2ft x 2ft) from contact moulded GRP, flanged internally and externally which are supported by stainless steel ties. Panels can be pre-insulated with polyurethane foam or standard non-insulated manufacture, which if required can be cased and insulated. Roof panels are constructed from panels and provided with an inspection hatch. Joints are sealed with butyl rubber sealant strip and secured with stainless steel bolts (integral) and galvanised (external). Also supplied with internal stainless steel ladder.
Size: Maximum height 4m. Capacity 500 – 450,000 litres.
Product Designation:
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270 R350

Note:
Proviso:
Manufacturer: Dewey Waters & Co Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0507096

Range of GRP sectional, cold water storage cisterns and covers. Storage for domestic purposes. Units are constructed of flanged panels (½m x ½m, 1m x ½m, 1m x 1m or 4ft x 4ft, 4ft x 2ft, 2ft x 2ft) from contact moulded GRP. Larger sizes with stainless steel ties. Panels can be supplied pre-insulated with polyurethane foam. Roof covers are constructed from panels of the same manufacture and are provided with an inspection hatch. Joints are sealed with butyl rubber sealant strip and secured with stainless steel bolts (internal) and galvanised (external). Cisterns are supplied with screened air inlets, screened warning and overflow pipes, and can be supplied with internal stainless steel ladder.
Size: 500 litres - 450,000 litres.
Product Designation:
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270 R350

Note:
Proviso:
Manufacturer: Dewey Waters & Co Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0404067

`Liquistore` range of cylindrical sectional cisterns for the storage of potable water comprising a tank shell of aluminium or galvanised steel sheets braided with rolled angle and wind girders of aluminium or galvanised mild steel and with aluminium tank roof. The tank shell is lined with a butyl rubber liner where in contact with potable water. Nuts and bolts in contact with potable water are stainless steel. Structures in contact with potable water are painted with Intex P1106 or B1106/SL. The cistern is fitted with screened overflow and warning pipes where appropriate and screened air vents (McAlpine ZWC FBR).
Size: Maximum height 6.072m, 133000 litres.
Product Designation: Liquistore.
Marking: Metal label on tank stating company name, logo, date of manufacture and capacity.
Installation Requirements : R001 R270 R280 R330 R350

Note:
Proviso:
Manufacturer: Franklin Hodge Industries Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0612077

Range of underground cisterns and pump systems. The system incorporates a cold-water storage cistern with pump supply to the receiving building, which is encased within a GRP pod. The pod is designed with overflow and leakage sump (which discharges at high level), frost protection heater, automatic pump control panel, watertight cover with access hatching and vent pipe to atmosphere. The overflow and leakage sump is designed to receive water from both the overflow and any leakage of water from outside of the pod. Once the sump pump has been activated the indication on the control panel operates the electrically controlled valve on the mains supply to the storage cistern, a maintenance engineer must then be called to re- set the system. The indicating control panel is situated both within the pod and within the supply building and can also be connected to remote alarms. The inlet supply to the storage cistern incorporates a non-verifiable double check assembly.
Size: 250 litres to 7500 litres.
Product Designation: Pod 7500, Pod 5000, Pod 2600.Minipod 1100.Micropod 1300, Micropod 800, Micropod 500, Micropod 250.
Marking: Manufacturer's name, contact details, serial number and installation instructions printed on adhesive label attached to control room wall.
Installation Requirements : R001

Note:
Proviso: 1. The air vent pipe and sump pump discharge pipe shall discharge above the flood height of the area where the pod is installed. 2. The air vent and sump pump discharge shall be protected against physical damage. 3. There must be a service and maintenance contract for the pod at all times. 4. All supply pipes to and from the pod shall be at a depth of between more than 750mm to 1350mm.
Manufacturer: Harton Services Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0302059

Range of one-piece GRP cisterns and lids for the storage of wholesome cold water. Units are pre-insulated with 25mm rigid polyurethane foam and polyester gel coating. Cisterns are fitted with a cover (secured with bolts), screened air inlet and screened overflow assembly.
Size: 125 litres - 9000 litres.
Product Designation: `Robust` imperial and metric range.
Marking: Adhesive label printed with manufacturer`s details, size/volume and reference number.
Installation Requirements : R001 R130 R270 R280

Note:
Proviso:
Manufacturer: IES - Robust Tanks Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0507095

PFG range of rectangular cisterns. The glass reinforced plastic pre-insulated cisterns are fitted with a cover (secured with bolts), screened air inlet, screened warning pipe and close fitting expansion pipe inlet. Size & Product Designation: Imperial range P1 (68 litres) to P19 (4545 litres). Metric range P501 (90 litres) to P511 (2600 litres). Low Profile range P203 (170 litres) to P219 (2050 litres).
Size:
Product Designation:
Marking: PFG labelled with Ref No and capacity printed on cistern.
Installation Requirements : R001 R130 R270

Note:
Proviso:
Manufacturer: Parton Fibreglass Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0209087

`PFG` range of sectional, cold water storage cisterns and covers. Units are constructed of panels (1m x 1m or 0.5m x 1m) from hot press mouldings GRP. Corner sections, roof panels and access holes are constructed of the same material. The cisterns have stainless steel internal bracing and galvanised external bracing. Joints are sealed with EPDM rubber or polyethylene foam. Cisterns are fitted with screened air inlets, screened warning and overflow pipes. Supplied with an internal GRP composite access ladders.
Size: Maximum height of unit 4.0m. Panel sizes 1m x 1m, 1m x 1/2m, 1/2m x 1/2m.
Product Designation: PFG range.
Marking: Manufacturer's name, address, capacity.
Installation Requirements : R001 R130 R270 R280 R350

Note:
Proviso:
Manufacturer: Parton Fibreglass Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0410034

`Polytank` range of kite marked black polyethylene feed and expansion cisterns to BS4213: 2004 for storing water for domestic purposes. Packed with all fittings to meet the requirements of Water Supply (Water Fittings) Regulations 1999. Fittings include snap on lid, insulation, screened air inlet, screened warning pipe elbow including tank connector, dip tube, expansion pipe grommet, back plate, plastic support washer and rubber sealing washer.
Size: 4 gallons (18 litres) to 100 gallons (454 litres).
Product Designation: Polytank PC4R 18 x 12 x 12 Polytank PC12R 20 x 12 x 20 Polytank PC12R 24 x 16 x 15 Polytank PC12R 20 x 15 x 18 Polytank PC15R 18 x 18 x 18 Polytank PC15R 24 x 12 x 20 Polytank PC15R 24 x 17 x 17 Polytank PC15R 24 x 15 x 18 Polytank PC18R 24 x 12 x 24 Polytank PC18R 24 x 18 x 19 Polytank PC20R 20 x 20 x 20 Polytank PC20R 24 x 15 x 24 Polytank PC25R 27 x 20 x 20 Polytank PC30R 24 x 24 x 24 Polytank PC35R 29 x 22 x 22 Polytank PC35R 30 x 24 x 23 Polytank PC42R 39 x 20 x 21 Polytank PC42R 46 x 19 x 19 Polytank PC50R 36 x 24 x 23 Polytank PC50R 46 x 24 x 19 Polytank PC25R 55 x 20 x 12 Polytank PC50R 64 x 18 x 19 Polytank PC70R 64 x 24 x 19 Polytank PC100R 64 x 26 x 23 Circular PC25C C25 Circular PC50C C50 Slimtank PC15X 30 x 19 x 15 Slimtank PC25X 30 x 19 x 19 Slimtank PC40X 46 x 24 x 17 Slimtank PC50X 46 x 24 x 20 XX size of tank in gallons. PC4R = 4 gallons.
Marking: `Polytank` embossed in body.
Installation Requirements : R001

Note:
Proviso:
Manufacturer: Polytank Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0210076

`S` and `D` range of pre-insulated one-piece GRP cisterns with lids, for cold-water use only. The tanks are strengthened externally with GRP coated bored prime steel frames running horizontally around the tank. The tanks have one-piece lids below 1000 litres and above are fitted with manhole access.
Size: 340 litres - 9700 litres.
Product Designation: S1 to S34, D1 to D34.
Marking: Adhesive label stating POW and type.
Installation Requirements : R001

Note:
Proviso:
Manufacturer: POW Processes of Water Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0606087

Metric and imperial ranges of GRP sectional cold-water storage cisterns, constructed from sectional panels, metric (1.5m x 1.0m) (1.0m x 1.0m) (1.0m x 0.5m) or imperial sizes (4ft x 4ft) (4ft x 2ft) (2ft x 2ft). Joints are sealed using plasticised butyl rubber. Having stainless steel tie rods and pultruded GRP inspection ladders.
Size: 1000 ltrs to 53625 ltrs.
Product Designation: `Metric` range `Imperial` range.
Marking: Laminated adhesive label printed with manufacturers name, address, telephone number, product code and capacity.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: POW Processes of Water Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0209086

`PW` range of pre-insulated rectangular one piece glass reinforced plastic cisterns for storing water for domestic purposes, having crystic resin and gel coat, having a one piece lid (GRP) all joints are sealed using polyethylene foam and having a square inspection hatch. Supplied with a potable water kit (McAlpine & Co Ltd). For cold water storage only.
Size: 90 - 9000 litres.
Product Designation: PW90 nominal capacity 90 litres PW160 nominal capacity 160 litres PW225 nominal capacity 225 litres PW340 nominal capacity 340 litres PW454 nominal capacity 454 litres PW570 nominal capacity 570 litres PW680 nominal capacity 680 litres PW909 nominal capacity 909 litres PW1135 nominal capacity 1135 litres PW1364 nominal capacity 1364 litres PW1590 nominal capacity 1590 litres PW1818 nominal capacity 1818 litres PW2272 nominal capacity 2272 litres PW2726 nominal capacity 2726 litres PW2850 nominal capacity 2850 litres PW3636 nominal capacity 3636 litres PW4535 nominal capacity 4535 litres PW5440 nominal capacity 5440 litres PW125 nominal capacity 125 litres PW250 nominal capacity 250 litres PW500 nominal capacity 500 litres PW750 nominal capacity 750 litres PW1000 nominal capacity 1000 litres PW1500 nominal capacity 1500 litres PW2000 nominal capacity 2000 litres PW2500 nominal capacity 2500 litres PW3000 nominal capacity 3000 litres PW3750 nominal capacity 3750 litres PW4500 nominal capacity 4500 litres PW5000 nominal capacity 5000 litres PW6000 nominal capacity 6000 litres PW7500 nominal capacity 7500 litres PW9000 nominal capacity 9000 litres
Marking: Side of cistern with an adhesive label showing manufacturer's name and address, product code, nominal capacity.
Installation Requirements : R001 R130 R270 R350

Note:
Proviso:
Manufacturer: Purewater Storage Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0606090

SC, M, EN, Low and GRP horizontal split ranges of rectangular glass reinforced polyester (GRP) cold-water storage cisterns and lids. Joints of the split tanks are sealed with mastic sealing tape and secured with stainless steel fixings. Units can be factory pre-insulated (with provision for the fixture of fittings) or non-insulated and supplied with insulating jackets to protect from heat and frost. Supplied with screened vent, screened overflow, grommet pipe fitting and screened warning pipes. Float operated valves are available as an option (Keraflo Aylesbury Valves).
Size: SC maximum capacity 4540 (litres) 1000 (gallons). M maximum capacity 6810 (litres) 1500 (gallons). EN maximum capacity 8000 (litres) 1760 (gallons). Low maximum capacity 3451 (litres) 760 (gallons). GRP horizontal split maximum capacity 8000 (litres) 1760 (gallons).
Product Designation: SC, M, EN, Low and GRP horizontal split ranges.
Marking: Pre-insulated `Sarena` tanks printed on outer panel. Manufacturer's name, address, model number, capacity, installation and warranty instructions printed on adhesive label.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Sarena MFG Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0606089

One piece, horizontal split and vertical split ranges of glass reinforced polyester (GRP) cold-water storage cisterns and lids of non-stock sizes (special pattern). Joints of the split tanks are sealed with mastic sealing tape and secured with stainless steel fixings. Units can be factory pre-insulated (with provision for the fixture of fittings) or non-insulated and supplied with insulating jackets to protect from heat and frost. Supplied with screened vent, screened overflow, grommet pipe fitting and screened warning pipes. Float operated valves are available as an option (Keraflo Aylesbury Valves).
Size: One piece maximum capacity 8000 litres, horizontal split maximum vertically split maximum capacity 4000 litres, capacity 8000 litres.
Product Designation: SP one piece and horizontal split VST vertically split.
Marking: Pre-insulated `Sarena` tanks printed on outer panel. Manufacturer's name, address, model number, capacity, installation and warranty instructions printed on adhesive label.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Sarena MFG Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor