2007년 9월 26일 수요일

One Piece Tanks & Two Part Tanks

ONE PIECE TANKS
Nicholson Plastics have been at the forefront of water storage industry since 1968, specialising in the design and construction of water storage tanks in Glass Reinforced Plastics (GRP) Regular users of our LONG LIFE Tanks come back to us time and time again. They have realised that over the years Nicholson tanks perform better, last longer. Local authorities, consultants, contractors and many others specify and use LONG LIFE tanks from Nicholson Plastics, secure in the knowledge that both they and their clients are in safe hands.
Supports
Specific gravity 1.8
Tensile strength 70MPa
Tensile Modulus 10GPa
Water absorption 0.2%
Maximum working temp. 60°c (Recommended)

-->Tanks must be mounted on a flat level platform supporting the whole of the base.
Dimensions The maximum allowable dimensions of the custom moulded tank must be specified along with the required nominal capacity. Please bear in mind access and installation restrictions.
Access Hatches Two types are available (i) 400mm diameter with screwed lid (ii) 610mm x 610mm bolted or hinged
Insulation Tanks can be supplied pre-insulated with rigid polyurethane foam encapsulated in the laminate. A range of thicknesses and corresponding U values is available. We will be pleased to give advice on insulation. Alternatively, we can supply 60mm glass fibre wool insulation jackets


TWO PART TANKS
Nicholson Plastics have been at the forefront of water storage
industry since 1968, specialising in the design and construction of
water storage tanks in Glass Reinforced Plastics (GRP)
Regular users of our LONG LIFE Tanks come back to us time and time again. They have realised that
over the years Nicholson tanks perform better, last longer.
Local authorities, consultants, contractors and many others specify and use LONG LIFE tanks from
Nicholson Plastics, secure in the knowledge that both they and their clients are in safe hands.

-->
Introduction
Specific gravity 1.8
Tensile strength 70MPa
Tensile Modulus 10GPa
Water absorption 0.2%
Maximum working temp. 60°c (Recommended)

-->Nicholson Plastics' two part tanks are ideal for installations where access is restricted. They are specially designed for cost effective self assembley. They are moulded to the same high standards as custom moulded one piece tanks and are approved by the WRAS for the storage of potable water.
Covers These are moulded as an integral feature for all sizes with vents and access hatched to meet BYLAW 30/WRAS.
Supports Tanks must be mounted on a flat level platform supporting the whole of the base.

댓글 없음: