Reliance Pacific Tanks Sdn Bhd

If you are looking for a reliable manufacturer of storage tanks for domestic water storage, you have stopped at the right site.

Reliance Pacific Tanks Sdn Bhd. established in 1997 and is a prominent manufacturer and service provider of water tanks for the Construction Sector in Malaysia.

Reliance Pacific Tanks Sdn Bhd is accredited to ISO 9001:2000 for manufacturing, sales and installation of FRP / GRP Sectional Panel Water Tanks.

We strive to be a customer centric organization by building a strong bond with our customers and other stakeholders so that customer gained maximum benefits from their alliance and network with us.

SUPERIOR MATERIAL & QUALITY SYSTEM ENSURED RELIABILITY
It is safe for storage of water for human consumption. It has a capacity ranges from 1000 litres to 500 000 litres. It is vigorously designed to withstand both hydrostatic and dynamic water pressures.

Our product is tested and certified by SIRIM to SS245:1995 for its physical, chemical, microbiology and cytotoxicity properties.

The Fibreglass Reinforced Polyester Tank is completely rust free, a factor which greatly improves sanitation. Thus it is safe for portable water storage designated for human consumption. Its non-corrodible properties greatly extend the life span of the tank and minimise maintenance.
INNOVATIVE IN PROVIDING AN EVERLASTING WATER TANK SYSTEM
It is assembly by connecting independent angular with bolts and reinforced by external and internal bracing. It is modular that you can create the required capacity freely depending on the volume of water required and space freely. This modular system allows for future upgrading and expansion.

HIGH PRESSURE HOT PRESS MOLDING
Reliance Pacific FRP Water Tank panels are molded using High Pressure Hot Compression Matched Metal Mold method that gives good finishing and dimensionally accurate panels to ensure durable and long lasting tanks.

MATERIAL FINITE ELEMENT ANALYSIS
All critical components of Reliance Pacific Tanks undergo computerized Structural Non-Linear Material Finite Element Analysis at the design stage. Our design follows strictly to all Engineering Code of Practice applicable to Structural & Mechanical Disciplines.

FRP Sectional Panel Water Tanks
Tank Capacity
1000 to 500 000 litres Note: This capacity is based on standard industry design, however larger capacity tank is available based on our evaluation of installation site conditions.
Tank Size
Breath (B) and Length (L) : multiples of either 0.5 m or 1.0 m
Depth (D) : 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 m
Service
3.1 Service Pressure and Temperature For storage of water at atmospheric pressure and ambient temperature.
3.2 Ultra-violet Resistance * UV-Gard coated panels provide increased ultra-violet resistant to prevent colour fading and variety choice of Pantone colour to match.

Components
4.1 Panels
4.1.1 Material
-Resin : conforms to BS 3532 -Glass : conforms ro BS 3369, BS 3496, and BS 3749
4.1.2 Dimensions : 1 m x 1 m, 0.5 m x 1m
4.1.3 Fabrication
- Flanges : Single Flange 90°
- Land Width : > 60mm
- Hole Diameter : 14 mm
4.1.4 Physical Properties
Properties SS245:1995 Reliance
Tensile Strength (MN/m²) > 70 124.8
Bending Strength (MN/m²) > 100 214
Young's Modulus (MN/m²) > 6000 11890
Glass Content > 25 % 37 %
Barcol Hardness > 30 50
Water Absorption < 1.0 % 0.2 %

4.1.5 Performance
Roof Panel : supports 120-kg point load
1 meter Panel : withstand pressure ≥ 58.86 kN/m²
2 meters Panel : withstand pressure ≥ 117.72 kN/m²
3 meters Panel : withstand pressure ≥ 176.58 kN/m²
4 meters Panel : withstand pressure ≥ 235.44 kN/m²
4.1.6 Effect on Water
Non Cytotoxic conforming to SS 375
Tasteless and Odourless
Pass WHO 1984 Guideline value on Harmful metals for Drinking Water Quality.
Do not Support Microbiological of Coliform, Pseudomonas and Fungi.

4.2 Bolts & Nuts
4.2.1 Bolt Size : Nominal Ø 12 mm
4.2.2 Standard : ISO 898-1 & ISO 898-2
4.2.3 Material : Hot Dipped Galvanized Mild Steel SS 117 or equivalent
- used for assembly of panel & in area exposed externally Stainless Steel SS 304
- used in areas in contact with water

4.3 Sealing Materials
Non-cytotoxic conforming to SS 375
Permanent Compressive Strain <4%
Type for assembly of
- Roof Panels : PE Foam
- Wall & Base Panels : Nitrile Foam
4.4 Supports for Panel
4.4.1 Reinforcement System for Panels
- Type I : External Support
- Type II : Tie Rod
- Type III : Internal Stays
4.4.2 Elements of external support are Hot Dipped Galvanized Mild Steel
4.4.3 Elements of internal support are SS 304
4.4.4 Roof thrust pole material is uPVC

4.5 Pipe Connections
4.5.1 Piping Openings : The dimensions comply with BS 4504 for flanges and BS 21 for threads. Other standards can be requested upon our agreement.
4.5.2 Buyer is responsible to provide us pipe openings requirements prior to our delivery.
4.5.3 Nozzles
- Sizing : 50 mm ~ 200 mm
- Quantity : Inlet, Outlet, Overflow, Balancing and Warning - One of each per tank/compartment
- Material : Hot Dipped Galvanized Mild Steel
- Exception : Whenever a flat panel is provided nozzle will be omitted.

4.6 Air Vent
Nominal Ø : 100, 150 mm
Material : Synthetic Resin
4.7 Manhole Hatch
Nominal Ø : 600 mm internal opening
Material : GRP
Hinges : Aluminium alloy
4.8 Internal And External ladder
Provided for tanks with depth 1.5 m or more Material
: Internal ladder
- Aluminium
- SS 304 * : External ladder
- Hot Dipped Galvanized Mild Steel
- Aluminium *
4.9 Water Level Indicators
Graduated scale type attached to the side of tank complete with floats, pulleys, cord, weighted pointers and scale graduated in metric suiting depth of tank.

Steel Foundation
5.1 Finishing
5.1.1 1 coat of Black Iron Oxide
5.1.2 5.1.2 Hot Dipped Galvanized *


Concrete Plint (by others)
Height : > 450 mm
Width : 200 mm Length : Tank Nominal
Length (L) or Breath (B) plus 200 mm

If you have any enquires or questions regarding our services, please contact us by calling or e-mailing us and we’ll get back to you as soon as possible.

Reliance Pacific Tanks Sdn Bhd (446107-K)
6F-29 & 6F-30, Pusat Perdagangan IOI
Bandar Puchong Jaya, Bt 9, Jalan Puchong
47100 Puchong, Selangor D.E., Malaysia

Tel : + 603 8076 2886
Fax : + 603 8076 8861
Email : sales@rptanks.com

KORVAN GRP SECTIONAL PANEL WATER TANKS

Dear Sir

KORVAN Co., Ltd was officially classified as a Venture Firm in 2002 and marked annual sales of 50 million USD$ in 2004 and 130 million USD dollars 2005. The company was awarded "Gimpo Industries Award" in 2004, "Excellent Venture Business Award" in 2005 and New Intellect Award" in 2006, Innovation-Business in 2007.

In order to produce more advanced grp panel and sink basin, a new largest factory of it's kind was built on an area of 360,000 sq ft. In March 2006 with the newest facilities and automated equipment complete with in-house analysis and research center. We are continuously investing and endeavoring in research and development.

Using unsaturated polyester resin as a main raw material, this factory produces composite material(GRP .SMC,BMC) to manufacture various products including grp sectional panel water tanks ,ceiling panel ,artificial marble(sink basin, wall decoration materials, etc)

Proud of the largest production facilities and the most hydraulic presses of newest types among domestic manufacturers, this factory leads local industries in both production capacity and quality.

■Hydraulic presses
◎2,500 TON: 2NOS ◎2,000TON:1NO
◎1,500TON:2NOS ◎1,000TON:2NOS ◎800TON:1NO

Since the completion of production facilities in 2005 for the materials of SMC (Sheet molding compound) &BMC (Bulk Molding Compound), for which the company had relied on outsourcing, SMC and BMC is now produced within the company enabling to produce better quality at lower cost.
The company is putting best effort to develop new material for SMC & BMC in order to be able to produce more diverse products.

GRP SECTIONAL PANEL STORAGE WATER TANKS.
■ Products Name : GRP Sectional Panel Water Tanks
■ Panel Type : ◈Non-Insulated Panel ◈Insulated Panel ◈Partition Panel
■ One-site bolt assembly : Tank shape and volume can be freely designed with
no restrictions based on site location, weather or climate
■ Features
- Clean and Hygienic ◈ Long life ◈ No leakage
- Stable structure ◈ Easy transportation ◈ Easy assembly
- No limit in size ( 550 Gallon in UK to no limit by combinations of panels)
■ Panel Specifications : Hot Pressed molded products by variety of molds size.
- Wall , Roof , Bottom Panel Size.
◎500 x 500 ◎ 500 x 1000 ◎ 500 x 1500 ◎ 500 x 2000 ◎ 1,000 X 1,000
◎.1,000 X 1,500 ◎1,000 X 2,000 ◎1,000 X 2,500 ◎1,000 X 3,000 mm
- Manhole Panel : Lockable a hinged manhole cover with a 60cm
- Drain Panel : Design by easy drainage
■ Reinforcement Accessories Specifications.
- Steel Skid : HDG(hot-dip galvanized)steel
- Assembly Bolt,Nuts : STS304, STS316, HDG, DACRO
- Access Ladder : Inside (STS or GRP) External (HDG or STS)
- Internal Reinforcement : Tie-rods(SS304, SS316)
- External Reinforcement : HDG
- Special Sealing tapes : PVC Foam ( certification Received PSB in singapore)
- Air Vent : Screened Air Vents
■ Options
- Partition Type
- Nozzle Inlet , drainage, outlet, overflow (Flange type , Socket Type 15~300mm)
- Level indicator to show water level from outside

■ Hydraulic presses facilities ( 8 NOS )
■ Referance
- Our GRP water tank panels and all related parts conform to water quality
standards and ISO 9001-2000 ,Quality Assurance Certification Received
- KORVAN TANK supply to domestic major construction companies and
export to various countries
- We appreciate your attention our products and hope to make further development
on your market. We also try to best to support your market promotion.

If you need further information,
please visit to our website and please feel free to contact us .

KORVAN CO.,LTD
www.korvan.net
e-mail : smctank@gmail.com
Headquarter & Main factory
115-4 Galsan-ri, Wolgot-myon,Gimpo-City,Gyungki-Do,South Korea
Tel : +82 - 31 - 981 6286 Fax : +82 - 31 - 987 7496
Factory2 :
19-4,Seokjung-RI, Daegot-Myon,Gimpo-City,Gyungki-Do,South Korea
Tel : +82 - 31 - 997 6285 Fax : +82 - 31 - 989 7496

SS:375 1994 PSB

30.
SS 375 : Part 1 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 1 - Specification
31.
SS 375 : Part 2 : 1 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 2 - Methods of test, Section 1 - Samples for testing Determination Of Total Iron In Inorganic Pigments Containing Iron
32.
SS 375 : Part 2 : 2 : 1 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- Part 2 - Methods of test, Section 2 : 1 - Odour and flavour of water - General method of test
33.
SS 375 : Part 2 : 2 : 2 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- Part 2 - Methods of test, Section 2 : 2 - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes
34.
SS 375 : Part 2 : 2 : 3 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -Part 2 - Section 2 : 3 - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses for conveying water for food and drink preparation
35.
SS 375 : Part 2 : 3 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water-Part 2 - Methods of test, Section 3 - Appearance of water
36.
SS 375 : Part 2 : 4 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water-Part 2 - Methods of test, Section 4 - Growth of aquatic microorganisms test
37.
SS 375 : Part 2 : 5 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- Part 2 - Methods of test, Section 5 - The extraction of substances that may be concern to public health
38.
SS 375 : Part 2 : 6 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- Part 2 - Methods of test, Section 6 - The extraction of metals
39.
SS 375 : Part 3 : 2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- Part 3 - High temperature test

SS245-1995 PSB Hydrostatic Test

CP 13 : 1999 Mechanical ventilation and air-conditioning in buildings
CP 29 : 1998 Fire hydrant systems and hose reels
CP 38 : 1999 Artificial lighting in buildings
CP 45 : 1988 Halon 1301 fire protection systems
CP 48 : 1989 Water services
CP 51 : 1995 Manufactured gas pipe installation
CP 52 : 1990 Automatic fire sprinkler system
CP 55 : 1991 Use and maintenance of portable fire extinguishers
SS 16 : 1985 W C seats (plastics)
SS 42 : 1971 Quality of vitreous china sanitary appliances
SS 69 : 1981 Floats (plastic) for float operated valves for cold water cisterns
SS 141 : 1976 Unplasticized PVC pipe for cold water service and industrial uses
SS 174 : 1977 Joints and fittings for use with unplasticized PVC pressure pipes
SS 183 : 1978 Concrete cylindrical pipes and fittings including manholes and street gullies
SS 213 : 1998 Unplasticized PVC pipes and fittings for soil, waster and vent applications
SS 232 Portable fire extinguishersPart 1 : 1999 Description, duration of operation, Class A and B fire testsPart 2 : 1999 Tightness, dielectric test, tamping test, special provisions
Part 3 : 1999 Construction, resistance to pressure, mechanical tests
Part 4 : 1999 Charges, minimum required fire
Part 5 : 1999 Specification and supplementary tests
Part 6 : 1999 Provisions for the attestation of conformity of portable fire extinguishers in accordance with SS232 Parts 1 to Part 5
SS 245 : 1995 Glass reinforced polyester sectional water tanks
SS 272 : 1983 Unplasticized PVC pipes below ground for drainlines and sewers
SS 333 : 1996 Fire dampers
SS 378 : 1996 Low capacity WC flushing cisterns up to 4.5L maximum
SS 379 : 1996 Vitreous china WC pans for use with low capacity WC flushing cisterns up to 4.5L maximum
SS 396 : 1997 Vitreous china WC pans for use with 6L flush valves
SS 489 : 2001

PSB

The national standardisation programme is coordinated by the Standards, Productivity and Innovation Board (SPRING Singapore), the national standards authority. It is to establish and publish Singapore Standards, by notification in the Government Gazette.
The national standardisation programme develops Singapore Standards on a consensus basis and promotes the wide acceptance of Singapore Standards by industry and government to enhance enterprises' business competitiveness.

LPCB (loss prevention certification board)

About us
BRE Certification (incorporating LPCB) is a sister company to BRE. We are a wholly owned subsidiary of the BRE Trust, which is a registered research and education charity.

As a world leading third party certification / approvals body we are dedicated to approving fire, security, construction, and environmental, products and services worldwide. Our approvals are designed to help a wide range of sectors, including: construction, healthcare, insurance, offices, manufacturers, shops, schools, transport & infrastructure etc.
For information about the history of approvals, click here.
Approval (or certification as it is also known) is independent third party confirmation that a product, system or service meets and continues to meet a standard, where there are no published standards, products may be approved to our own specialised designed schedules.
We approve products and services to many different standards including:
Our own Loss Prevention Standards (LPS)
British Standards (BS)
International (ISO)
European (EN)
Underwriters Laboratories (UL)
We believe our marks stand for something special - they are true 'quality marks' and are recognised across the world.

Certification of fire and security products and services.
Certification of construction products, environmental schemes and Health and Safety.
We are accredited by the United Kingdom Accreditation Service for most of our schemes and our accreditation covers product, personnel and quality management systems.
We are a Notified Body under the Construction Products Directive (CPD), the Marine Equipment Directive (MED), the Pressure Equipment Directive (PED) and the Transportable Pressure Equipment Directive (TPED).
Choosing good quality products and services sends positive messages to influencers and stakeholders such as regulators, insurers, lenders, customers and suppliers. Our approvals give you a number of intangible benefits, such as compliance with legislation, market entry, differentiation and confidence etc. Choosing products and services, tested and approved against the appropriate standards is important and in the long run could save you time and money.
Understand just how our approvals process works and why it is so highly regarded. To ensure quality and to avoid misuse of standards, we list all approved products, services and licensees in our Red Book, which is updated here everyday. So search our Red Book to check the latest listings.
With the most extensive fire testing laboratories in the world, a highly qualified team of expert scientists and engineers, we are also uniquely placed to offer testing, research, specialist advice and a bespoke one stop shop service to a wide range of clients.
Business particulars:
The Red Books are a product of LPCB
The Loss Prevention Certification Board (LPCB) is a part of BRE Certification Ltd
BRE Certification Limited, Registered in England and Wales, number 3548352. Registered address: Bucknalls Lane, Garston, Watford WD25 9XXVAT registration number GB 689 9499 27.
BRE Certification Ltd is owned by the BRE Trust.
BRE Trust, Registered under number 3282856 in England and Wales, and registered as a charity (No 1092193).Registered address as above.

Franklin Hodge Industries storage tank - Products(2)

Galvanized Liquitainer
Where space is at a premium, the Liquitainer ® / Firetainer ® tank is an ideal solution for bulk water storage indoors or out. A wide range of shapes and any length or width can be catered for, with a maximum height of 4.5m.
Using steel sections of either rectangular, circular or u-beams, a structure is formed which eliminates the need for internal bracing. Galvanised steel panels are bolted between the sections and the interior is fitted with an open top tailored membrane liner. Alternative covers are available either fl at with a raised ball valve housing for indoor use, or with a low profile pitch for outdoor use.
Liquitainer ®/ Firetainer ® tanks can be located on any suitable flat load bearing surface, such as an existing reinforced concrete floor, or roof top, and are simply bolted to the floor surface.
Firetainer ® tanks are approved by the UK Loss Prevention Certification Board for the storage of fire sprinkler water.

Versatility in design. A variety of shapes and sizes can be supplied. Existing obstructions such as building support columns can be encapsulated within the tank by ‘sleeving’ the membrane liner around them.
Ease and speed of assembly. No sealants are used in the construction of the tank. All that is required is straightforward site assembly.
Simplicity of foundations. There is no need to seal the tank to the concrete foundation. The membrane liner has a floor in it and the tank shell is simply bolted to the foundation.
Low maintenance. The outer steelwork structure is hot dip galvanised to BS EN ISO 1461 (1999) and the shell panels and connection plates are manufactured from pre-galvanised steel sheet coated with a heavy duty spangle finish, complying to BS EN 10147 Grade Fe E280G. Internally the membrane liner will not rot or degrade in the same way that other coatings and finishes do, under normal water storage conditions.

Galvanised Tritainer

For small to medium capacities of water storage, where space is at a premium, the Tritainer ®/ Firetainer ® tank offers a cost effective solution.
Using triangular shaped galvanised steel panels which make up 1.0m2 modules that are then bolted together on site, a rapidly assembled rectangular tank that can fit into small and difficult spaces can be provided. Internally a hot vulcanised tailor made membrane liner is fitted to the tank. Any length and width can be catered for, with a maximum height of 2.5m.
Firetainer ® tanks are approved by the UK Loss Prevention Certification Board for the storage of fire sprinkler water.

- Easy to handle, relatively small panels, enabling easy access to restricted areas.
- No internal bracing. This means no internal corrosion problems.
- No sealants or gaskets to the tank shell, which means faster installation and elimination of

leakage problems.
- Insulation can be placed internally between the tank liner and tank wall, thereby protecting

the insulation from the environment and vandalism.

Aluminium Liquitainer

Where space is at a premium, the Liquitainer ®/ Firetainer ® tank is an ideal solution for bulk water storage indoors or out. A wide range of shapes and any length or width can be catered for, with a maximum height of 5.4m.
Using steel sections of either rectangular, circular or u-beams, a structure is formed which eliminates the need for internal bracing. Aluminium panels are bolted between the sections and the interior is fi tted with an open top tailored membrane liner. Alternative covers are available either flat with a raised ball valve housing for indoor use, or with a low profile pitch for outdoor use.
Liquitainer ®/ Firetainer ® tanks can be located on any suitable flat load bearing surface, such as an existing reinforced concrete floor, or roof top, and are simply bolted to the floor surface.
Firetainer ® tanks are approved by the UK Loss Prevention Certification Board for the storage of fi re sprinkler water.

Versatility in design.

A variety of shapes and sizes can be supplied. Existing obstructions such as building support columns can be encapsulated within the tank by ‘sleeving’ the membrane liner around them.
Ease and speed of assembly.

No sealants are used in the construction of the tank. All that is required is straightforward site assembly.
Simplicity of foundations.

There is no need to seal the tank to the concrete foundation. The membrane liner has a fl oor in it and the tank shell is simply bolted to the foundation.
Low maintenance.

The outer steelwork structure is hot dip galvanised to BS EN ISO 1461 (1999) and the aluminium shell panels are of a marine grade aluminium alloy to BS EN AW 5083 H22. Internally the membrane liner will not rot or degrade in the same way that other coatings and fi nishes do, under normal water storage conditions.

Franklin Hodge Industries storage tank - Products

Galvanized Liquistore

For standard fire sprinkler water storage applications or general industrial water storage requirements, the Liquistore ® / Firestore ® tank is a cost effective solution.
Using site assembled components, consisting of overlapped and bolted galvanised steel panels with either a trough deck or aluminium sectional site assembled cover, together with an internal, open top membrane liner, the Liquistore ® / Firestore ® offers a truly long life and low maintenance water storage system.
Standard tanks are available in capacities from 10m3 (2,200 UK gallons) to 2,222m3 (488,840 UK gallons) and in diameters from 3.06m to 21.40m and heights from 1.25m to 13.26m. Non standard and larger size tanks are available upon request.
Firestore ® tanks are approved by the UK Loss Prevention Certification Board and Factory Mutual Assurance of the United States of America for storage of fire sprinkler water and by the UK Water Regulations Advisory Scheme for the storage of potable water under the name Liquistore®.

Ease and speed of assembly. No sealants are used on the tank shell. This means that site installation can make full use of hydraulic jacking with the confi dence in knowing that the integrity of the tank is not reliant on a large number of individual panel seals. Simplicity of foundations. All that is required to site the tank
Simplicity of foundations. All that is required to site the tank is a fl at load bearing surface, typically of reinforced concrete. The bottom rolled angle at the tank base is simply bolted to the concrete floor.
Low maintenance. The galvanised steel panels to the tank are made from high quality pre-galvanised strip to BS2989 Grade Z35, with a zinc coating of 300g/m2 each side of the panel. For plate thicknesses above 4.2mm, each plate is hot dip galvanised to the requirements of BS EN ISO 1461 (1999). This means a highly corrosion resistant exterior fi nish to the tank. Internally the hot vulcanised, tailor-made membrane liner separates the stored water from the tank shell, often a major cause of corrosion. The membrane liner itself will not rot or deteriorate in the same way that other coatings and fi nishes to the interior of tanks will.

Aluminum Liquistore

The tank is of cylindrical bolted construction, made from EN 48S-2 Type EN AW 5083- H22 aluminium alloy with aluminium angle strengthening hoops of Grade 6082-T4 at the top and bottom, and is supplied with an aluminium low profile sectional cover incorporating a ball valve housing and access way.
Liquid Storage Containers. Click image to enlarge
A typical aluminium Liquistore® installation of three 155,100 gallon tanks (non-standard ladder arrangement).Rapid and straightforward to install.Virtually zero maintenance internally and externally.Long life.Easy to transport, ideal for remote areas.Prefabricated components for site assembly.
In addition the tank is fitted with an open top internal membrane liner. The assembled tank is clamped down with anchor bolts fixed to the base.
All tanks are normally supplied complete with external aluminium hooped access ladder (beginning approximately 2.4m from tank base), aluminium handrailing around the access platform, calibrated contents gauge, 25mm warning overflow, 80mm drain valve and other connections as required.
Standard tanks are available in capacities from 20m3 (4,400 UK gallons) to over 5000m3 (1,100,000 UK gallons), diameters from 3.06m to 32.17m and heights from 2.477m to 13.26m. Tanks can be supplied on a specially designed steel support structure at any specified height above ground level. Non-standard and larger sizes in other tank materials and cover types can be built to suit particular applications.
Our standard Liquistore ® is designed to withstand normal UK conditions when fully complete and filled. Non-standard designs are available to meet particular criteria. Fully complete but unfilled, the standard Liquistore ® will normally withstand moderate wind loadings. Actual performance will depend upon tank configuration and diameter to height ratio. Where a Liquistore ® is expected to be subject to particularly severe conditions, or to be regularly in the unfilled condition, additional strengthening will be provided.

- Rapid and straightforward to install.
- Virtually zero maintenance internally and externally.
- Long life.
- Easy to transport, ideal for remote areas.
- Prefabricated components for site assembly

Franklin Hodge Industries storage tank

CYLINDRICAL STORAGE TANKS

Our Firestore/Liquistore range of cylindrical tanks are our most popular. Using flat sheets of high grade, high zinc galvanised steel, or a “marine grade” alloy of aluminium, Firestore / Liquistore tanks are bolted together on site with a tailor made internal liner to contain the stored water.

Galvanised Liquistore ® / Firestore ®

For standard fire sprinkler water storage applications or general industrial water storage requirements, the Liquistore ® / Firestore ® tank is a cost effective solution.

Aluminium Liquistore ® / Firestore ®

The tank is of cylindrical bolted construction, made from EN 48S-2 Type EN AW 5083- H22 aluminium alloy with aluminium angle strengthening hoops of Grade 6082-T4 at the top and bottom, and is supplied with an aluminium low profile sectional cover incorporating a ball valve housing and access way.


RECTANGULAR STORAGE TANKS

Our Firetainer/Liquitainer range of rectangular tanks offer a very effective method of making use of limited space for the storage of water. Either flat or triangular sheets of a high grade, high zinc galvanised steel, or a marine grade alloy of aluminium, bolted to galvanised steel stanchions or stiffeners, can be used to design a wide range of tank shapes and sizes to suit awkward spaces.

Galvanised Liquitainer ® / Firetainer ®

Where space is at a premium, the Liquitainer ® / Firetainer ® tank is an ideal solution for bulk water storage indoors or out. A wide range of shapes and any length or width can be catered for, with a maximum height of 4.5m.

Galvanised Tritainer ® / Firetainer ®


For small to medium capacities of water storage, where space is at a premium, the Tritainer ® / Firetainer ® tank offers a cost effective solution.


Aluminium Liquitainer ® / Firetainer ®


Where space is at a premium, the Liquitainer ® / Firetainer ® tank is an ideal solution for bulk water storage indoors or out. A wide range of shapes and any length or width can be catered for, with a maximum height of 5.4m.

Franklin Hodge Industries

Welcome

Franklin Hodge Industries welcomes you to the world of reliable and proven site-assembled liquid storage tanks. Our water storage tanks are installed on every continent and in virtually every climatic condition. Franklin Hodge is proud of it’s postion as a recognised standard for quality in the tank industry.

What We Do

Franklin Hodge Industries design, manufacture and install a range of cylindrical and rectangular water storage tanks.

Why Buy Franklin Hodge Tanks?

Franklin Hodge Industries liquid storage tanks and products offer customers the following benefits:
A proven track record.
Confidence, reliability and peace of mind.
Design flexibility and solutions to problems.
Support of an experienced and professional team.
Over thirty years experience within the tank industry.
Team-work from quotation to commission.

WRAS Approved Water Fittings:Section 0225

WRAS Approved Water Fittings

Section 0225
Cisterns FIRE SPRINKLER SUCTION

Listing Number 0504078

`DECCA` Firestor range of GRP sectional hot press moulded sectional cold-water storage cisterns, for fire sprinkler systems with uPVC roof panels. Cisterns are constructed from metric panels, (2m x 1m, 1.5m x 1m, 1m x 0.5m and corner sections, or 1.2m x 1.2m, 1.2m x 0.6m and corner sections). Panels can be supplied pre-insulated and are assembled with extruded butyl rubber seals. Cistern can be internally braced with horizontal galvanised steel sections or alternatively cisterns can be braced with no internal tie rod systems. For non-potable water use.
Size: Maximum height 4m, maximum capacity 2,190,000 litres.
Product Designation: DECCA firestor/Flosto range.
Marking: 'DECCA Plastics', company contact details and WRAS logo printed on adhesive label on body.
Installation Requirements : R001 R270 R350

Note:
Proviso:
Manufacturer: Decca Plastics Ltd

Listing Number 0304091

`1000 Module` range of hot pressed GRP sectional storage cisterns for the storage of water for fire sprinkler systems, incorporating a screened Type `AB` air gap arrangement. The panels are sealed using Butyl Rubber sealing tape. Units can be supplied with additional access hatches for the inspection of the air gap arrangement. 50mm valve, weir length = 800, weir depth = 127. Value of `h` = 27 & air gap = 100mm (2 x dia). 80mm valve, weir length = 800, weir depth = 196. Value of `h` = 46 & air gap = 150mm (2 x dia). 100mm valve, weir length = 1600, weir depth = 243. Value of `h` = 43 & air gap = 200mm (2 x dia). 150mm valve, weir length = 2400, weir depth = 356. Value of `h` = 56 & air gap = 300mm (2 x dia).
Size: Panel size 1m², height 3m, capacity 576000 litres.
Product Designation: 1000 Module.
Marking: Cistern housing has data plated inscribed works order number, capacity, LPC number, BS7491 Part 3 1994, date and manufacturers details.
Installation Requirements : R001 R270 R280 R350

Note:
Proviso:
Manufacturer: Dewey Waters & Co Ltd
List all fittings by this manufacturer
Factor:

Listing Number 0412063

`Firestore` range of cylindrical sectional sprinkler suction tanks, constructed on a concrete base using BS EN 10147 Grade Fe350G pre-galvanised to a G600 heavy duty spangle finish sheets. Bolted together using spun galvanised nuts and bolts. The tank is stiffened top and bottom with a galvanised steel rolled angle. A tailor made Butyl liner is fitted inside the tank (Grade 72601). Covers may be plastic coated profiled sheet cladding or a galvanised steel support structure or alternatively aluminium alloy cladding on an aluminium structure. A float operated valve is provided with an access panel. The cisterns are fitted with Peter Smith float operated valves. The weir is provided with a 0.65mm square screen and a light box on the exterior of the tank.
Size: Maximum size 1211m3.
Product Designation: Firestore range.
Marking: Name plate stating Firestore, capacity, date installed, manufacturer`s name and address.
Installation Requirements : R001 R280

Note:
Proviso:
Manufacturer: Franklin Hodge Industries Ltd


Listing Number 0412060

`Firetainer` range of rectangular modular fire sprinkler suction tanks constructed on a concrete base. Either aluminium or galvanised steel panels on BS EN 10147 Grade F2350G pre- galvanised to a G600 heavy duty spangle finish, sheets bolted together using spun galvanised nuts and bolts. A tailor made butyl liner is fitted inside the tank (Grade 72601). Covers may be plastic coated profile sheet cladding on a galvanised steel support structure or alternatively aluminium profile sheeting on an aluminium structure. The units are supplied with Peter Smith float operated valves. The weir is provided with a 0.65mm square screen and a light box on the exterior of the tank.
Size: 1260m³.
Product Designation: Firetainer.
Marking: Name plate stating Firetainer, capacity, date installed, manufacturer`s name and address.
Installation Requirements : R001 R280

Note:
Proviso:
Manufacturer: Franklin Hodge Industries Ltd

Listing Number 0310065

`Sekisui` insulated or uninsulated storage cistern with AB air gap` the sectional comprises a cold water cistern assembled from glass reinforced plastics (GRP) panels and polyester resin for construction of cold water storage cisterns for wholesome water. The panels are constructed in sandwich form with a layer of GRP each side of a 20mm thick block of insulation (ridge polyethylene foam). Manufacturers calculated thermal capacity of the insulated panels is 0.022098. The largest capacity cisterns have stainless steel internal bracing and PVC pole supports. The roof covers are of the same panel construction provided with manhole inspection hatch, joints are sealed with synthetic rubber gaskets. The weir dimensions is relevant to the inlet size. The dimensions of the weir is 1m x 0.5m and is acceptable for use with inlet dimensions up to DN 80. The storage cistern must be installed with a WRAS approved electrically operated level control switch and a WRAS approved electrically operated inlet valve.
Size: Maximum height 4m maximum capacity 2270000 litres.
Product Designation: Sekisui Insulation Tank with AB air gap. FS (1 metre high). FH & FHX (1.5 metre high). FW, FJX & FWX (2 metre high). FT & FTX (2.5 metre high). FZ & FZX (3 metre high). FK & FKX (3.5 metre high). FQ & FQX (4 metre high).
Marking: Data plate on side of cistern showing model number, size, capacity manufactured date, nominal capacity and manufactures name and address.
Installation Requirements : R001 R270 R280 R350

Note:
Proviso:
Manufacturer: Sekisui Aqua Systems Co Ltd

WRAS Approved Water Fittings:Section 0170

WRAS Approved Water Fittings

Section 0170
Cisterns FEED AND EXPANSION - PLASTICS
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.

Listing Number 0209093

Rectangular cold water, feed and expansion cistern with close fitting lid. Supplied with front operated valve (BS1212 Part 2, Beta Ballvalve).
Size: 18 litre.
Product Designation: F & E Cistern - `Titan`.
Marking: Bottom of cistern moulded with product type.
Installation Requirements : R001 R130 R270 R350

Note:
Proviso:
Manufacturer: Gledhill Water Storage Ltd
List all fittings by this manufacturer
Factor:

Listing Number 0302055

`EX 104` range of rectangular black plastics (polypropylene Type B) feed and expansion cistern supplied with a backing plate of galvanised steel.
Size: 18 litres.
Product Designation: EX 104.
Marking: Cistern (top) moulded name of manufacturer, type, reference and capacity.
Installation Requirements : R130 R270 R280

Note:
Proviso:
Manufacturer: Polypipe Building Products Ltd

WRAS Approved Water Fittings:Section 0140

WRAS Approved Water Fittings

Section 0140

Cisterns COLD WATER STORAGE AND LIDS - METAL
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.
Listing Number 0212087


`Braithwaite` range of rectangular, sectional cold water storage cisterns for potable water, constructed from externally or internally bolted to BS 1564 Type 1, hot pressed steel panels with strip rubber and extruded mastic strip sealant. Panels may be galvanised to BS EN ISO 1461:1999, or shot blasted to SA2½ and primed with International Interplate 170. Following installation tanks may be coated with WRc or DWI approved coatings.
Size: 1,634,260 L (1634.26m³).
Product Designation: `Braithwaite` sectional storage cistern.
Marking: Panel pressed with manufacturers registered trademark.
Installation Requirements : R001 R270 R280 R320 R330

Note:
Proviso:
Manufacturer: Braithwaite Engineers Ltd
List all fittings by this manufacturer
Factor:

Listing Number 0306098


Range of sectional cold-water storage cisterns having a maximum depth of 3 x 4 ft panels (3.66m) supplied with a flat steel (for indoor installation) or pitched roof. Assembled from bolted pressed steel flanged panels 4ft (1.22m) x 4ft (1.22m) or (1m x 1m square) jointed with rubber sealing strips. Units are supplied with manholes and/or ventilator cowls with rubber gaskets. Cisterns are coated internally with a suitable approved paint.
Size: 522.964.
Product Designation: BSI 564 Type 1.
Marking: Data plate on side of tank printed company name, size and capacity, site name. Panels marked HB.
Installation Requirements : R270 R280 R320

Note:
Proviso:
Manufacturer: Horseley Bridge Tanks

WRAS Approved Water Fittings:Section 0130

WRAS Approved Water Fittings

Section 0130
Cisterns / COLD WATER STORAGE AND LIDS - PLASTICS

Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.

Listing Number 0312117

Print this entry
`AQ` range of rectangular moulded pre-insulated (GRP) storage cisterns with bolted down lids (sealed with self-adhesive polyethylene foam). The internal surface of the storage cisterns is coated with a listed gelcoat. The cisterns are fitted with a screened air inlet, screened warning pipe and screened overflow (if over 1000 litres).
Size: 42 - 9000 litres.
Product Designation: `AQ` range.
Marking: Top of cistern with adhesive label showing company name, telephone number and capacity.
Installation Requirements : R001 R130 R270 R280 R350

Note:
Proviso:
Manufacturer: Aquatanks Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0706066

Print this entry
`BOP` range of rectangular GRP storage cisterns manufactured from polyester resin. The lid is screwed into position and sealed with polyethylene foam.
Size: 240 litres - 4550 litres (50 gallons - 1000 gallons).
Product Designation: BOP50, BOP70, BOP70LP, BOP100, BOP100LP, BOP110LP, BOP125, BOP150, BOP200, BOP220, BOP220LP, BOP250, BOP300, BOP350, BOP400, BOP500, BOP500LP, BOP600, BOP800, BOP1000.LP denotes alternative low profile cisterns.
Marking: Manufacturer`s name, logo, capacity, model and date of manufacture printed on adhesive label attached to body.
Installation Requirements : R001 R130 R270 R280

Note:
Proviso:
Manufacturer: Balmoral Group Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0503112

Print this entry
`Decca One Piece` range of GRP one-piece cold water storage cisterns and covers. Tanks are manufactured from glass-reinforced plastic and covers are sealed with WRAS approved polyethylene/butyl seal. The cisterns are supplied with screened air inlet and above 1000 litres an inspection hatch is provided. The cisterns are supplied either un-insulated or pre- insulated. For a full product range see manufacturer`s catalogue.
Size: DP10-DP26, M1-M16, CM01-CM24, TP10-TP26.
Product Designation: Decca One Piece, Decca Two Piece.
Marking: Adhesive label with Decca Plastics, address, model and trade name and certification number.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Decca Plastics Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0507098

Print this entry
Range of one-piece GRP cold-water storage cisterns and lids. Units can be pre-insulated with polyurethane foam or standard non-insulated manufacture. Capacity range 30L - 4500L.
Size: 30 litres - 4500 litres.
Product Designation: A, B, C, D, E, F, G and H ranges.
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270

Note:
Proviso:
Manufacturer: Dewey Waters & Co Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0310113

Print this entry
`Long-Life` range of one-piece rectangular GRP cold-water storage cisterns with bolt-on covers. Cisterns above 1m in depth have external steel support frames.
Size: 18.2 litres to 4500 litres.
Product Designation: Long-Life.
Marking: Adhesive label states model, capacity, manufacturer's name and address.
Installation Requirements : R001

Note:
Proviso:
Manufacturer: Nicholson Plastics Ltd
List all fittings by this manufacturer
Factor:
List all fittings by this factor
Listing Number 0609086

Print this entry
Circular sectional cistern for storing water for wholesome purposes. The cistern is manufactured of glass enamelled steel panels with external reinforcing rings bolted from the inside out, using galvanised bolts with polyethylene coated heads. The cistern is sealed internally using Sikaflex TS plus.
Size: 280,000 litres, 6.86m diameter, 8.65m high.
Product Designation: Tank number 3705D.
Marking: Manufacturer's name, volume, size of cistern and installers details printed on adhesive label on cistern adjacent to opening hatch on top of cistern.
Installation Requirements : R001 R270 R280 R350

Note:
Proviso:
Manufacturer: Vitkovice - Envi AS
List all fittings by this manufacturer
Factor:

WRAS Approved Water Fittings

WRAS Approved Water Fittings

Section 0120
Cisterns Storing Water for Domestic Purposes

DRINKING, WASHING, COOKING AND SANITARY
Cisterns in this section comprise units which include all the essential items identified in Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.

A.C. Plastic Industries Limited
Listing Number 0605131

`Aquastow` range of GRP sectional, cold water storage cisterns and covers. Units are constructed of panels (1m x 1m or 0.5m x 1m) manufactured from hot press moulded GRP, corner sections and stainless steel bracing. Roof covers are constructed from panels of the same manufacture and are provided with a manhole cover. Joints are sealed with Butyl sealant and secured with galvanised or stainless steel bolts. Cisterns are fitted with screened air inlets, screened warning and overflow pipes (can be supplied with an `AB` air gap).
Size: 228,000 litres.
Product Designation: `Aquastow` hot press moulded sectional GRP cold water storage tanks.
Marking: Aquastow, AC Plastics Industries Ltd, capacity, printed on adhesive label attached to outer panel.
Installation Requirements : R001,R270,R280,R350

Balmoral Group Ltd

Listing Number 0706067

`Balmoral M100-B30` range of hot press moulded GRP sectional, pre-insulated panels, for the construction of cold-water storage cisterns. Assembled panels are sealed with extruded butyl rubber. The cisterns are fitted with uPVC roof struts to support the roof panels. Galvanised steel struts internally brace them with stainless steel ties externally. The cisterns are provided with wholesome water storage kit consisting of a screened air inlet screened warning pipe and a screened overflow (where applicable). The roof structure is fitted with one or more sealed manhole access points, mounted either directly on the roof structure or fitted into a float operated valve housing. Nuts and bolts in contact with water are stainless steel.
Size: 1000 - 448,000 litres capacity.
Product Designation: Balmoral M100-B30.
Marking: Balmoral Tank, logo and contact information moulded into panels. Balmoral Tank, logo, date of manufacture and capacity printed on adhesive label attached to panel.
Installation Requirements :

R001

R270

R280

Balmoral Tanks
Listing Number 0605132

Range of rotationally moulded high-density polyethylene storage tanks. The polyethylene cisterns are fitted with tight fitting lids, screened air inlets, screened warning pipes and overflow. Can be supplied without fittings and fixtures.
Size:
Product Designation: LP1250WST, H3500WST, V1365WST, V1800WST, V2600WST, V3635WST, V5455WST, V7270WST and V10000WST.C1365, C1800, C2600, C3635, C5455, C7270, C10000, C15000, C20000, C25000, C30000, C35000, CH1500, CH2000, CH3500, CLP1250, CSL1000, CSL1250.
Marking: Balmoral tanks installation guide and product information printed on adhesive label attached to outer panel.
Installation Requirements : R001 R270 R280 R350

Decca Plastics Ltd

Listing Number 0503111

`Decca One Piece` range of GRP one-piece cold water storage cisterns and covers. Tanks are manufactured from glass-reinforced plastic and covers are sealed with WRAS approved polyethylene/butyl seal. The cisterns are supplied with screened air inlet connecting kits and above 1000 litres an inspection hatch is provided. They are supplied either un-insulated or pre-insulated. For a full product range see manufacturer`s catalogue.
Size: DP10-DP26, M1-M16, CM01-CM24, TP10-TP26.
Product Designation: Decca One Piece, Decca Two Piece.
Marking: Adhesive label with Decca Plastics, address, model and trade name and certification number.
Installation Requirements : R001 R270 R280

Dewey Waters & Co Ltd

Listing Number 0507099

Range of one-piece GRP cisterns and lids for domestic cold-water storage. Units can be pre- insulated with polyurethane foam and are supplied with a wholesome water kit consisting screened air inlet, screened warning pipe and close fitting vent pipe grommet. Cisterns above 200 litres are fitted with an inspection hatch. Capacity range 30L - 4500L.
Size: 30 litres - 4500 litres.
Product Designation: A, B, C, D, E, F, G and H ranges.
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270

Dewey Waters & Co Ltd

Listing Number 0507097

Print this entry
Range of GRP sectional, cold water storage cisterns and covers. Units are constructed of panels (0.5m x 0.5m, 1m x 0.5m, 1m x 1m or 4ft x 4ft, 4ft x 2ft, 2ft x 2ft) from contact moulded GRP, flanged internally and externally which are supported by stainless steel ties. Panels can be pre-insulated with polyurethane foam or standard non-insulated manufacture, which if required can be cased and insulated. Roof panels are constructed from panels and provided with an inspection hatch. Joints are sealed with butyl rubber sealant strip and secured with stainless steel bolts (integral) and galvanised (external). Also supplied with internal stainless steel ladder.
Size: Maximum height 4m. Capacity 500 – 450,000 litres.
Product Designation:
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270 R350

Dewey Waters & Co Ltd

Listing Number 0507096

Range of GRP sectional, cold water storage cisterns and covers. Storage for domestic purposes. Units are constructed of flanged panels (½m x ½m, 1m x ½m, 1m x 1m or 4ft x 4ft, 4ft x 2ft, 2ft x 2ft) from contact moulded GRP. Larger sizes with stainless steel ties. Panels can be supplied pre-insulated with polyurethane foam. Roof covers are constructed from panels of the same manufacture and are provided with an inspection hatch. Joints are sealed with butyl rubber sealant strip and secured with stainless steel bolts (internal) and galvanised (external). Cisterns are supplied with screened air inlets, screened warning and overflow pipes, and can be supplied with internal stainless steel ladder.
Size: 500 litres - 450,000 litres.
Product Designation:
Marking: Adhesive label with Dewey Waters, capacity and date.
Installation Requirements : R001 R130 R270 R350

Franklin Hodge Industries Ltd

Listing Number 0404067

`Liquistore` range of cylindrical sectional cisterns for the storage of potable water comprising a tank shell of aluminium or galvanised steel sheets braided with rolled angle and wind girders of aluminium or galvanised mild steel and with aluminium tank roof. The tank shell is lined with a butyl rubber liner where in contact with potable water. Nuts and bolts in contact with potable water are stainless steel. Structures in contact with potable water are painted with Intex P1106 or B1106/SL. The cistern is fitted with screened overflow and warning pipes where appropriate and screened air vents (McAlpine ZWC FBR).
Size: Maximum height 6.072m, 133000 litres.
Product Designation: Liquistore.
Marking: Metal label on tank stating company name, logo, date of manufacture and capacity.
Installation Requirements : R001 R270 R280 R330 R350

Harton Services Ltd

Listing Number 0612077

Range of underground cisterns and pump systems. The system incorporates a cold-water storage cistern with pump supply to the receiving building, which is encased within a GRP pod. The pod is designed with overflow and leakage sump (which discharges at high level), frost protection heater, automatic pump control panel, watertight cover with access hatching and vent pipe to atmosphere. The overflow and leakage sump is designed to receive water from both the overflow and any leakage of water from outside of the pod. Once the sump pump has been activated the indication on the control panel operates the electrically controlled valve on the mains supply to the storage cistern, a maintenance engineer must then be called to re- set the system. The indicating control panel is situated both within the pod and within the supply building and can also be connected to remote alarms. The inlet supply to the storage cistern incorporates a non-verifiable double check assembly.
Size: 250 litres to 7500 litres.
Product Designation: Pod 7500, Pod 5000, Pod 2600.Minipod 1100.Micropod 1300, Micropod 800, Micropod 500, Micropod 250.
Marking: Manufacturer's name, contact details, serial number and installation instructions printed on adhesive label attached to control room wall.
Installation Requirements : R001

Note:
Proviso: 1. The air vent pipe and sump pump discharge pipe shall discharge above the flood height of the area where the pod is installed. 2. The air vent and sump pump discharge shall be protected against physical damage. 3. There must be a service and maintenance contract for the pod at all times. 4. All supply pipes to and from the pod shall be at a depth of between more than 750mm to 1350mm.
Manufacturer: Harton Services Ltd

IES - Robust Tanks Ltd

Listing Number 0302059

Range of one-piece GRP cisterns and lids for the storage of wholesome cold water. Units are pre-insulated with 25mm rigid polyurethane foam and polyester gel coating. Cisterns are fitted with a cover (secured with bolts), screened air inlet and screened overflow assembly.
Size: 125 litres - 9000 litres.
Product Designation: `Robust` imperial and metric range.
Marking: Adhesive label printed with manufacturer`s details, size/volume and reference number.
Installation Requirements : R001 R130 R270 R280

Parton Fibreglass Ltd
Listing Number 0507095

PFG range of rectangular cisterns. The glass reinforced plastic pre-insulated cisterns are fitted with a cover (secured with bolts), screened air inlet, screened warning pipe and close fitting expansion pipe inlet. Size & Product Designation: Imperial range P1 (68 litres) to P19 (4545 litres). Metric range P501 (90 litres) to P511 (2600 litres). Low Profile range P203 (170 litres) to P219 (2050 litres).
Size:
Product Designation:
Marking: PFG labelled with Ref No and capacity printed on cistern.
Installation Requirements : R001 R130 R270

Note:
Proviso:
Manufacturer: Parton Fibreglass Ltd

Parton Fibreglass Ltd
Listing Number 0209087

`PFG` range of sectional, cold water storage cisterns and covers. Units are constructed of panels (1m x 1m or 0.5m x 1m) from hot press mouldings GRP. Corner sections, roof panels and access holes are constructed of the same material. The cisterns have stainless steel internal bracing and galvanised external bracing. Joints are sealed with EPDM rubber or polyethylene foam. Cisterns are fitted with screened air inlets, screened warning and overflow pipes. Supplied with an internal GRP composite access ladders.
Size: Maximum height of unit 4.0m. Panel sizes 1m x 1m, 1m x 1/2m, 1/2m x 1/2m.
Product Designation: PFG range.
Marking: Manufacturer's name, address, capacity.
Installation Requirements : R001 R130 R270 R280 R350

Note:
Proviso:
Manufacturer: Parton Fibreglass Ltd

Polytank Ltd
Listing Number 0410034

`Polytank` range of kite marked black polyethylene feed and expansion cisterns to BS4213: 2004 for storing water for domestic purposes. Packed with all fittings to meet the requirements of Water Supply (Water Fittings) Regulations 1999. Fittings include snap on lid, insulation, screened air inlet, screened warning pipe elbow including tank connector, dip tube, expansion pipe grommet, back plate, plastic support washer and rubber sealing washer.
Size: 4 gallons (18 litres) to 100 gallons (454 litres).
Product Designation: Polytank PC4R 18 x 12 x 12 Polytank PC12R 20 x 12 x 20 Polytank PC12R 24 x 16 x 15 Polytank PC12R 20 x 15 x 18 Polytank PC15R 18 x 18 x 18 Polytank PC15R 24 x 12 x 20 Polytank PC15R 24 x 17 x 17 Polytank PC15R 24 x 15 x 18 Polytank PC18R 24 x 12 x 24 Polytank PC18R 24 x 18 x 19 Polytank PC20R 20 x 20 x 20 Polytank PC20R 24 x 15 x 24 Polytank PC25R 27 x 20 x 20 Polytank PC30R 24 x 24 x 24 Polytank PC35R 29 x 22 x 22 Polytank PC35R 30 x 24 x 23 Polytank PC42R 39 x 20 x 21 Polytank PC42R 46 x 19 x 19 Polytank PC50R 36 x 24 x 23 Polytank PC50R 46 x 24 x 19 Polytank PC25R 55 x 20 x 12 Polytank PC50R 64 x 18 x 19 Polytank PC70R 64 x 24 x 19 Polytank PC100R 64 x 26 x 23 Circular PC25C C25 Circular PC50C C50 Slimtank PC15X 30 x 19 x 15 Slimtank PC25X 30 x 19 x 19 Slimtank PC40X 46 x 24 x 17 Slimtank PC50X 46 x 24 x 20 XX size of tank in gallons. PC4R = 4 gallons.
Marking: `Polytank` embossed in body.
Installation Requirements : R001

Note:
Proviso:
Manufacturer: Polytank Ltd

POW Processes of Water Ltd

Listing Number 0210076

`S` and `D` range of pre-insulated one-piece GRP cisterns with lids, for cold-water use only. The tanks are strengthened externally with GRP coated bored prime steel frames running horizontally around the tank. The tanks have one-piece lids below 1000 litres and above are fitted with manhole access.
Size: 340 litres - 9700 litres.
Product Designation: S1 to S34, D1 to D34.
Marking: Adhesive label stating POW and type.
Installation Requirements : R001

Note:
Proviso:
Manufacturer: POW Processes of Water Ltd

POW Processes of Water Ltd
Listing Number 0606087

Metric and imperial ranges of GRP sectional cold-water storage cisterns, constructed from sectional panels, metric (1.5m x 1.0m) (1.0m x 1.0m) (1.0m x 0.5m) or imperial sizes (4ft x 4ft) (4ft x 2ft) (2ft x 2ft). Joints are sealed using plasticised butyl rubber. Having stainless steel tie rods and pultruded GRP inspection ladders.
Size: 1000 ltrs to 53625 ltrs.
Product Designation: `Metric` range `Imperial` range.
Marking: Laminated adhesive label printed with manufacturers name, address, telephone number, product code and capacity.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: POW Processes of Water Ltd

Purewater Storage Ltd
Listing Number 0209086

`PW` range of pre-insulated rectangular one piece glass reinforced plastic cisterns for storing water for domestic purposes, having crystic resin and gel coat, having a one piece lid (GRP) all joints are sealed using polyethylene foam and having a square inspection hatch. Supplied with a potable water kit (McAlpine & Co Ltd). For cold water storage only.
Size: 90 - 9000 litres.
Product Designation: PW90 nominal capacity 90 litres PW160 nominal capacity 160 litres PW225 nominal capacity 225 litres PW340 nominal capacity 340 litres PW454 nominal capacity 454 litres PW570 nominal capacity 570 litres PW680 nominal capacity 680 litres PW909 nominal capacity 909 litres PW1135 nominal capacity 1135 litres PW1364 nominal capacity 1364 litres PW1590 nominal capacity 1590 litres PW1818 nominal capacity 1818 litres PW2272 nominal capacity 2272 litres PW2726 nominal capacity 2726 litres PW2850 nominal capacity 2850 litres PW3636 nominal capacity 3636 litres PW4535 nominal capacity 4535 litres PW5440 nominal capacity 5440 litres PW125 nominal capacity 125 litres PW250 nominal capacity 250 litres PW500 nominal capacity 500 litres PW750 nominal capacity 750 litres PW1000 nominal capacity 1000 litres PW1500 nominal capacity 1500 litres PW2000 nominal capacity 2000 litres PW2500 nominal capacity 2500 litres PW3000 nominal capacity 3000 litres PW3750 nominal capacity 3750 litres PW4500 nominal capacity 4500 litres PW5000 nominal capacity 5000 litres PW6000 nominal capacity 6000 litres PW7500 nominal capacity 7500 litres PW9000 nominal capacity 9000 litres
Marking: Side of cistern with an adhesive label showing manufacturer's name and address, product code, nominal capacity.
Installation Requirements : R001 R130 R270 R350

Note:
Proviso:
Manufacturer: Purewater Storage Ltd

Sarena MFG Ltd

Listing Number 0606090

SC, M, EN, Low and GRP horizontal split ranges of rectangular glass reinforced polyester (GRP) cold-water storage cisterns and lids. Joints of the split tanks are sealed with mastic sealing tape and secured with stainless steel fixings. Units can be factory pre-insulated (with provision for the fixture of fittings) or non-insulated and supplied with insulating jackets to protect from heat and frost. Supplied with screened vent, screened overflow, grommet pipe fitting and screened warning pipes. Float operated valves are available as an option (Keraflo Aylesbury Valves).
Size: SC maximum capacity 4540 (litres) 1000 (gallons). M maximum capacity 6810 (litres) 1500 (gallons). EN maximum capacity 8000 (litres) 1760 (gallons). Low maximum capacity 3451 (litres) 760 (gallons). GRP horizontal split maximum capacity 8000 (litres) 1760 (gallons).
Product Designation: SC, M, EN, Low and GRP horizontal split ranges.
Marking: Pre-insulated `Sarena` tanks printed on outer panel. Manufacturer's name, address, model number, capacity, installation and warranty instructions printed on adhesive label.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Sarena MFG Ltd

Sarena MFG Ltd

Listing Number 0606089

One piece, horizontal split and vertical split ranges of glass reinforced polyester (GRP) cold-water storage cisterns and lids of non-stock sizes (special pattern). Joints of the split tanks are sealed with mastic sealing tape and secured with stainless steel fixings. Units can be factory pre-insulated (with provision for the fixture of fittings) or non-insulated and supplied with insulating jackets to protect from heat and frost. Supplied with screened vent, screened overflow, grommet pipe fitting and screened warning pipes. Float operated valves are available as an option (Keraflo Aylesbury Valves).
Size: One piece maximum capacity 8000 litres, horizontal split maximum vertically split maximum capacity 4000 litres, capacity 8000 litres.
Product Designation: SP one piece and horizontal split VST vertically split.
Marking: Pre-insulated `Sarena` tanks printed on outer panel. Manufacturer's name, address, model number, capacity, installation and warranty instructions printed on adhesive label.
Installation Requirements : R001 R270 R280

Note:
Proviso:
Manufacturer: Sarena MFG Ltd