The largest GRP Panel Water tanks in the world
Lacated : Terminal-1 , Dubai Internatonal Airport, Dubai , UAE
Install :FTC
Panel : Bridgestone in Japan
External system
SMC CO..LTD
E-mail : info@grptank.com
2009년 6월 11일 목요일
GRP Water tank in Dubai Terminal 1
The largest GRP Panel Water tanks in the world
Lacated : Terminal-1 , Dubai Internatonal Airport, Dubai , UAE
Install :FTC
Panel : Bridgestone in Japan
External system
SMC CO..LTD
E-mail : info@grptank.com
2009년 5월 25일 월요일
Former President Roh Moo-hyun
Former President Roh Moo-hyun, 63 years old, threw himself off of a mountain near his hometown of Bongwha village located in the South Gyeongsang Province during the early morning of May 23. The former President was being investigated by prosecutors. This unprecedented incident has seized the whole country with sorrow and shock.
Former President Roh was threw himself off of “Owl Rock,” located on a mountain near his home at 6:40 a.m., and immediately afterwards was carried to Busan University Hospital in Yansan-city located in the South Gyeongsang Province. In spite of receiving emergency treatment, Roh was declared dead at 9:30 a.m.
The South Gyeongsang Province Policy Agency said, “Former President Roh departed his home with his bodyguard at 5:45 a.m. and threw himself from ”Owl Rock“ while hiking in the mountains.”
Former president Roh left a brief note consisting of fourteen clauses in his computer before he left home. According to Kim Kyung-su, Roh’s close aide, the former president demonstrated remorse to close acquaintances, “I am indebted to so many people. Many people have suffered due to me.” Roh also said, “The pains I have received are also countless” in reference to the pressure and suffering caused by prosecutors’ investigations.
Roh added, “Life and death are a part of nature. Cremate me and leave only a single tombstone near my home.” He had returned to live in his hometown of Bongwha Village since his term‘s conclusion in February of last year.
Former President Roh had been summoned by prosecutors on April 30 for questioning based on allegations that he had received bribes from Park Yeon-cha, the Chairman of Taekwang Co. The police and prosecutors have installed an investigative headquarters office in South Gyeongsang’s Police Agency and are questioning bodyguards who accompanied the former president. The body of the former president Roh was placed in his hometown of Bongwha Village at 6:30 p.m. May 23. The funeral services will be decided among family members.
2008년 3월 25일 화요일
The largest Storage Water Tanks in Mushrif project
Dewa signs Dh12b deals for six units
By Shakir Husain, Staff Reporter
Published: March 13, 2008, 00:48
Dubai: Dubai Electricity and Water Authority (Dewa) said yesterday it has signed contracts worth Dh12 billion with local and foreign firms for six electricity generation and water desalination projects.
The deals also involve work on water reservoirs, substations and a pipeline, the authority said.
Dewa managing director and chief executive officer Saeed Mohammad Al Tayer said the new projects will allow the utility provider to cater to rising demand.
By 2020, Dewa's target is to have 20,000 megawatts (MW) of power and 1,000 million gallons of water capacity.
One contract is for the construction of a power and desalination plant at Jebel Ali called 'M Station'.
The M Station package is a combined cycle cogeneration power plant at the cost of Dh6.2 billion.
It comprises six Siemens gas turbines, six Doosan heat recovery steam generators and three Alstom steam turbines. The plant will produce 2,000 MW of electricity when completed around the middle of 2010.
The desalination package shall consist of eight desalination units, each with an output of 17.5 million gallons per day, and four boilers with a total output of 140 million gallons. The project is scheduled for completion in June 2010. The third contract is for the construction of a 20-inch diesel fuel oil (DFO) pipeline from Jebel Ali Free Zone to Aweer Power Station. It will cost Dh155 million.
The scope of work for the project includes all mechanical, civil, cooling, and protection and leak detection systems.
Mushrif project
Another project involves construction of a water reservoir at Mushrif with a storage capacity of 180 million gallons. The Dh620 million contract includes all civil and mechanical work. The reservoir project is expected to be completed by April 2009.
The fifth contract is for the construction of two 400/132 kV substations at Barsha and Nad Al Sheba for a total of Dh816 million.
These facilities are expected to operational by the end of 2009.
Dewa also awarded a contract for a 400/132 kV transformer station at Techno Park to supply electricity the industrial zone and other areas like Dubai Industrial City, Jebel Ali and Airport City. This project will be completed by February 2010.
Green move: New power unit soon
Dubai recently signed a memorandum of understanding with three foreign companies to build its first independent power plant. The $6-billion plant will use fuel from synthetic gas produced through the coal gasification process.
The companies part of the plan are Sino Global International, Skyline Services Group, and Samena Power and Energy Limited. The process to produce fuel will be conducted at facilities in the US.
A contract is expected to be signed later this year. It will be completed in 2011 and generate 2,000 MW of electricity.
"It will provide clean energy and diversify our power production," Al Tayer said.
Dewa will be the sole customer for the plant's output. Final negotiations for the project are yet to be conducted and Al Tayer said Dewa could become a partner in the project.
John KIM
By Shakir Husain, Staff Reporter
Published: March 13, 2008, 00:48
Dubai: Dubai Electricity and Water Authority (Dewa) said yesterday it has signed contracts worth Dh12 billion with local and foreign firms for six electricity generation and water desalination projects.
The deals also involve work on water reservoirs, substations and a pipeline, the authority said.
Dewa managing director and chief executive officer Saeed Mohammad Al Tayer said the new projects will allow the utility provider to cater to rising demand.
By 2020, Dewa's target is to have 20,000 megawatts (MW) of power and 1,000 million gallons of water capacity.
One contract is for the construction of a power and desalination plant at Jebel Ali called 'M Station'.
The M Station package is a combined cycle cogeneration power plant at the cost of Dh6.2 billion.
It comprises six Siemens gas turbines, six Doosan heat recovery steam generators and three Alstom steam turbines. The plant will produce 2,000 MW of electricity when completed around the middle of 2010.
The desalination package shall consist of eight desalination units, each with an output of 17.5 million gallons per day, and four boilers with a total output of 140 million gallons. The project is scheduled for completion in June 2010. The third contract is for the construction of a 20-inch diesel fuel oil (DFO) pipeline from Jebel Ali Free Zone to Aweer Power Station. It will cost Dh155 million.
The scope of work for the project includes all mechanical, civil, cooling, and protection and leak detection systems.
Mushrif project
Another project involves construction of a water reservoir at Mushrif with a storage capacity of 180 million gallons. The Dh620 million contract includes all civil and mechanical work. The reservoir project is expected to be completed by April 2009.
The fifth contract is for the construction of two 400/132 kV substations at Barsha and Nad Al Sheba for a total of Dh816 million.
These facilities are expected to operational by the end of 2009.
Dewa also awarded a contract for a 400/132 kV transformer station at Techno Park to supply electricity the industrial zone and other areas like Dubai Industrial City, Jebel Ali and Airport City. This project will be completed by February 2010.
Green move: New power unit soon
Dubai recently signed a memorandum of understanding with three foreign companies to build its first independent power plant. The $6-billion plant will use fuel from synthetic gas produced through the coal gasification process.
The companies part of the plan are Sino Global International, Skyline Services Group, and Samena Power and Energy Limited. The process to produce fuel will be conducted at facilities in the US.
A contract is expected to be signed later this year. It will be completed in 2011 and generate 2,000 MW of electricity.
"It will provide clean energy and diversify our power production," Al Tayer said.
Dewa will be the sole customer for the plant's output. Final negotiations for the project are yet to be conducted and Al Tayer said Dewa could become a partner in the project.
John KIM
2008년 1월 19일 토요일
Hall-Woolford Tank Company
Company History
Hall-Woolford Tank Company was established in 1854. Considered leaders in our industry, our goal is to continue manufacturing, servicing, installing and inspecting wooden tanks the way it has always been meant; with care, quality and craftsmanship. Our firm employs only the very best. Muliti-generations of tank builders are still with us today.
Producing high volume of tanks per year, our yard is continuously being replenished with the highest quality tank stock lumber. Particular attention is focused on raw material to meet rigid specifications. Experienced craftsman select the right material to meet each customers needs. Although wood tanks all look the same when new, the quality of the lumber will determine the longevity. At Hall-Woolford, a special relationship with lumber suppliers has been forged. They understand our devotion to customer's needs, and have satisfied our commitment to providing only the finest lumber for each and every application. We've lasted the test of time because our customers come first!
Corrosion and abrasion resistant
Reliable
Long-lasting
Self insulating
Minimum Maintenance
Services
The benefit of being in business since 1854 is the best service Hall-Woolford can offer. Throughout our long history we've helped customers grow, prosper, enjoy, and have the confidence that the service we provide is the best in the business. The experience and types of situations we've seen cannot be matched by anyone. We work along with you or your staff to plan, execute and complete your project in a timely manner. W e stand ready to provide the following services:
Tank, hot tub, planter manufacturing
Tank installation
Tank inspections
Tank repair
Fabrication of industrial wood products
Supply tank accessories
Liner installation
Erection and service crews traveling to any port of call
prompt and accurate quotations
Consultation
Evaluation of historical wooden tanks
Products
Tank Accessories
Tank Liners
Planters
Hot Tubs
Our yard is well stocked to produce tanks on demand. We carry the following species of lumber:
Tank stock, kiln dried, Alaskan Yellow Cedar
Tank grade, kiln dried, Clear All Heart Douglas Fir
Tank stock, kiln dried, Western Red Cedar
Tank grade, air dried, Clear All Heart California Redwood
Tank grade, air dried, Atlantic White Cedar
FAS, White Oak
Red Cypress
Species are selected to perform the best with each application. We consult with you and decide what type of wood is best suited to your service.
A-36 mild steel hoops are used. Depending on you application we will select material as follows:
-Black Iron
-Hot dipped galvanized
-PVC sheathed hoops
-On special applications, Stainless Steel
-Sizes range from 3/8" diameter to 1-1/4" diameter
Tank lugs (hoop section connectors) are supplied with similar finish as the hoops. The PVC lugs are coated and baked. The fasteners are Hex Heavy Nuts supplied in finishes consistent with the hoop material.
--------------------------------------------------------------------------------
Tank Accessories
For your needs the following tank accessories are in stock:
-Plumbing connections
-Automatic level control switches
-Float valves (ball cocks)
-Pipe fittings
-Interior wood ladders
-Outside steel ladders (with finishes to meet your service)
-Ladder brackets, goose necks, mounting clips
-Ladder safety climb device, and ladder climb lock out
-Liquid level gauge boards
-Tank heads, flat covers, conical covers, sloped covers, or covers by design
-Custom fabricated metal and wood parts
2007년 12월 25일 화요일
Reliance Pacific Tanks Sdn Bhd
If you are looking for a reliable manufacturer of storage tanks for domestic water storage, you have stopped at the right site.
Reliance Pacific Tanks Sdn Bhd. established in 1997 and is a prominent manufacturer and service provider of water tanks for the Construction Sector in Malaysia.
Reliance Pacific Tanks Sdn Bhd is accredited to ISO 9001:2000 for manufacturing, sales and installation of FRP / GRP Sectional Panel Water Tanks.
We strive to be a customer centric organization by building a strong bond with our customers and other stakeholders so that customer gained maximum benefits from their alliance and network with us.
SUPERIOR MATERIAL & QUALITY SYSTEM ENSURED RELIABILITY
It is safe for storage of water for human consumption. It has a capacity ranges from 1000 litres to 500 000 litres. It is vigorously designed to withstand both hydrostatic and dynamic water pressures.
Our product is tested and certified by SIRIM to SS245:1995 for its physical, chemical, microbiology and cytotoxicity properties.
The Fibreglass Reinforced Polyester Tank is completely rust free, a factor which greatly improves sanitation. Thus it is safe for portable water storage designated for human consumption. Its non-corrodible properties greatly extend the life span of the tank and minimise maintenance.
INNOVATIVE IN PROVIDING AN EVERLASTING WATER TANK SYSTEM
It is assembly by connecting independent angular with bolts and reinforced by external and internal bracing. It is modular that you can create the required capacity freely depending on the volume of water required and space freely. This modular system allows for future upgrading and expansion.
HIGH PRESSURE HOT PRESS MOLDING
Reliance Pacific FRP Water Tank panels are molded using High Pressure Hot Compression Matched Metal Mold method that gives good finishing and dimensionally accurate panels to ensure durable and long lasting tanks.
MATERIAL FINITE ELEMENT ANALYSIS
All critical components of Reliance Pacific Tanks undergo computerized Structural Non-Linear Material Finite Element Analysis at the design stage. Our design follows strictly to all Engineering Code of Practice applicable to Structural & Mechanical Disciplines.
FRP Sectional Panel Water Tanks
Tank Capacity
1000 to 500 000 litres Note: This capacity is based on standard industry design, however larger capacity tank is available based on our evaluation of installation site conditions.
Tank Size
Breath (B) and Length (L) : multiples of either 0.5 m or 1.0 m
Depth (D) : 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 m
Service
3.1 Service Pressure and Temperature For storage of water at atmospheric pressure and ambient temperature.
3.2 Ultra-violet Resistance * UV-Gard coated panels provide increased ultra-violet resistant to prevent colour fading and variety choice of Pantone colour to match.
Components
4.1 Panels
4.1.1 Material
-Resin : conforms to BS 3532 -Glass : conforms ro BS 3369, BS 3496, and BS 3749
4.1.2 Dimensions : 1 m x 1 m, 0.5 m x 1m
4.1.3 Fabrication
- Flanges : Single Flange 90°
- Land Width : > 60mm
- Hole Diameter : 14 mm
4.1.4 Physical Properties
Properties SS245:1995 Reliance
Tensile Strength (MN/m²) > 70 124.8
Bending Strength (MN/m²) > 100 214
Young's Modulus (MN/m²) > 6000 11890
Glass Content > 25 % 37 %
Barcol Hardness > 30 50
Water Absorption < 1.0 % 0.2 %
4.1.5 Performance
Roof Panel : supports 120-kg point load
1 meter Panel : withstand pressure ≥ 58.86 kN/m²
2 meters Panel : withstand pressure ≥ 117.72 kN/m²
3 meters Panel : withstand pressure ≥ 176.58 kN/m²
4 meters Panel : withstand pressure ≥ 235.44 kN/m²
4.1.6 Effect on Water
Non Cytotoxic conforming to SS 375
Tasteless and Odourless
Pass WHO 1984 Guideline value on Harmful metals for Drinking Water Quality.
Do not Support Microbiological of Coliform, Pseudomonas and Fungi.
4.2 Bolts & Nuts
4.2.1 Bolt Size : Nominal Ø 12 mm
4.2.2 Standard : ISO 898-1 & ISO 898-2
4.2.3 Material : Hot Dipped Galvanized Mild Steel SS 117 or equivalent
- used for assembly of panel & in area exposed externally Stainless Steel SS 304
- used in areas in contact with water
4.3 Sealing Materials
Non-cytotoxic conforming to SS 375
Permanent Compressive Strain <4%
Type for assembly of
- Roof Panels : PE Foam
- Wall & Base Panels : Nitrile Foam
4.4 Supports for Panel
4.4.1 Reinforcement System for Panels
- Type I : External Support
- Type II : Tie Rod
- Type III : Internal Stays
4.4.2 Elements of external support are Hot Dipped Galvanized Mild Steel
4.4.3 Elements of internal support are SS 304
4.4.4 Roof thrust pole material is uPVC
4.5 Pipe Connections
4.5.1 Piping Openings : The dimensions comply with BS 4504 for flanges and BS 21 for threads. Other standards can be requested upon our agreement.
4.5.2 Buyer is responsible to provide us pipe openings requirements prior to our delivery.
4.5.3 Nozzles
- Sizing : 50 mm ~ 200 mm
- Quantity : Inlet, Outlet, Overflow, Balancing and Warning - One of each per tank/compartment
- Material : Hot Dipped Galvanized Mild Steel
- Exception : Whenever a flat panel is provided nozzle will be omitted.
4.6 Air Vent
Nominal Ø : 100, 150 mm
Material : Synthetic Resin
4.7 Manhole Hatch
Nominal Ø : 600 mm internal opening
Material : GRP
Hinges : Aluminium alloy
4.8 Internal And External ladder
Provided for tanks with depth 1.5 m or more Material
: Internal ladder
- Aluminium
- SS 304 * : External ladder
- Hot Dipped Galvanized Mild Steel
- Aluminium *
4.9 Water Level Indicators
Graduated scale type attached to the side of tank complete with floats, pulleys, cord, weighted pointers and scale graduated in metric suiting depth of tank.
Steel Foundation
5.1 Finishing
5.1.1 1 coat of Black Iron Oxide
5.1.2 5.1.2 Hot Dipped Galvanized *
Concrete Plint (by others)
Height : > 450 mm
Width : 200 mm Length : Tank Nominal
Length (L) or Breath (B) plus 200 mm
If you have any enquires or questions regarding our services, please contact us by calling or e-mailing us and we’ll get back to you as soon as possible.
Reliance Pacific Tanks Sdn Bhd (446107-K)
6F-29 & 6F-30, Pusat Perdagangan IOI
Bandar Puchong Jaya, Bt 9, Jalan Puchong
47100 Puchong, Selangor D.E., Malaysia
Tel : + 603 8076 2886
Fax : + 603 8076 8861
Email : sales@rptanks.com
2007년 12월 7일 금요일
KORVAN GRP SECTIONAL PANEL WATER TANKS
Dear Sir
KORVAN Co., Ltd was officially classified as a Venture Firm in 2002 and marked annual sales of 50 million USD$ in 2004 and 130 million USD dollars 2005. The company was awarded "Gimpo Industries Award" in 2004, "Excellent Venture Business Award" in 2005 and New Intellect Award" in 2006, Innovation-Business in 2007.
In order to produce more advanced grp panel and sink basin, a new largest factory of it's kind was built on an area of 360,000 sq ft. In March 2006 with the newest facilities and automated equipment complete with in-house analysis and research center. We are continuously investing and endeavoring in research and development.
Using unsaturated polyester resin as a main raw material, this factory produces composite material(GRP .SMC,BMC) to manufacture various products including grp sectional panel water tanks ,ceiling panel ,artificial marble(sink basin, wall decoration materials, etc)
Proud of the largest production facilities and the most hydraulic presses of newest types among domestic manufacturers, this factory leads local industries in both production capacity and quality.
■Hydraulic presses
◎2,500 TON: 2NOS ◎2,000TON:1NO
◎1,500TON:2NOS ◎1,000TON:2NOS ◎800TON:1NO
Since the completion of production facilities in 2005 for the materials of SMC (Sheet molding compound) &BMC (Bulk Molding Compound), for which the company had relied on outsourcing, SMC and BMC is now produced within the company enabling to produce better quality at lower cost.
The company is putting best effort to develop new material for SMC & BMC in order to be able to produce more diverse products.
GRP SECTIONAL PANEL STORAGE WATER TANKS.
■ Products Name : GRP Sectional Panel Water Tanks
■ Panel Type : ◈Non-Insulated Panel ◈Insulated Panel ◈Partition Panel
■ One-site bolt assembly : Tank shape and volume can be freely designed with
no restrictions based on site location, weather or climate
■ Features
- Clean and Hygienic ◈ Long life ◈ No leakage
- Stable structure ◈ Easy transportation ◈ Easy assembly
- No limit in size ( 550 Gallon in UK to no limit by combinations of panels)
■ Panel Specifications : Hot Pressed molded products by variety of molds size.
- Wall , Roof , Bottom Panel Size.
◎500 x 500 ◎ 500 x 1000 ◎ 500 x 1500 ◎ 500 x 2000 ◎ 1,000 X 1,000
◎.1,000 X 1,500 ◎1,000 X 2,000 ◎1,000 X 2,500 ◎1,000 X 3,000 mm
- Manhole Panel : Lockable a hinged manhole cover with a 60cm
- Drain Panel : Design by easy drainage
■ Reinforcement Accessories Specifications.
- Steel Skid : HDG(hot-dip galvanized)steel
- Assembly Bolt,Nuts : STS304, STS316, HDG, DACRO
- Access Ladder : Inside (STS or GRP) External (HDG or STS)
- Internal Reinforcement : Tie-rods(SS304, SS316)
- External Reinforcement : HDG
- Special Sealing tapes : PVC Foam ( certification Received PSB in singapore)
- Air Vent : Screened Air Vents
■ Options
- Partition Type
- Nozzle Inlet , drainage, outlet, overflow (Flange type , Socket Type 15~300mm)
- Level indicator to show water level from outside
■ Hydraulic presses facilities ( 8 NOS )
■ Referance
- Our GRP water tank panels and all related parts conform to water quality
standards and ISO 9001-2000 ,Quality Assurance Certification Received
- KORVAN TANK supply to domestic major construction companies and
export to various countries
- We appreciate your attention our products and hope to make further development
on your market. We also try to best to support your market promotion.
If you need further information,
please visit to our website and please feel free to contact us .
KORVAN CO.,LTD
www.korvan.net
e-mail : smctank@gmail.com
Headquarter & Main factory
115-4 Galsan-ri, Wolgot-myon,Gimpo-City,Gyungki-Do,South Korea
Tel : +82 - 31 - 981 6286 Fax : +82 - 31 - 987 7496
Factory2 :
19-4,Seokjung-RI, Daegot-Myon,Gimpo-City,Gyungki-Do,South Korea
Tel : +82 - 31 - 997 6285 Fax : +82 - 31 - 989 7496
피드 구독하기:
글 (Atom)
