If you are looking for a reliable manufacturer of storage tanks for domestic water storage, you have stopped at the right site.
Reliance Pacific Tanks Sdn Bhd. established in 1997 and is a prominent manufacturer and service provider of water tanks for the Construction Sector in Malaysia.
Reliance Pacific Tanks Sdn Bhd is accredited to ISO 9001:2000 for manufacturing, sales and installation of FRP / GRP Sectional Panel Water Tanks.
We strive to be a customer centric organization by building a strong bond with our customers and other stakeholders so that customer gained maximum benefits from their alliance and network with us.
SUPERIOR MATERIAL & QUALITY SYSTEM ENSURED RELIABILITY
It is safe for storage of water for human consumption. It has a capacity ranges from 1000 litres to 500 000 litres. It is vigorously designed to withstand both hydrostatic and dynamic water pressures.
Our product is tested and certified by SIRIM to SS245:1995 for its physical, chemical, microbiology and cytotoxicity properties.
The Fibreglass Reinforced Polyester Tank is completely rust free, a factor which greatly improves sanitation. Thus it is safe for portable water storage designated for human consumption. Its non-corrodible properties greatly extend the life span of the tank and minimise maintenance.
INNOVATIVE IN PROVIDING AN EVERLASTING WATER TANK SYSTEM
It is assembly by connecting independent angular with bolts and reinforced by external and internal bracing. It is modular that you can create the required capacity freely depending on the volume of water required and space freely. This modular system allows for future upgrading and expansion.
HIGH PRESSURE HOT PRESS MOLDING
Reliance Pacific FRP Water Tank panels are molded using High Pressure Hot Compression Matched Metal Mold method that gives good finishing and dimensionally accurate panels to ensure durable and long lasting tanks.
MATERIAL FINITE ELEMENT ANALYSIS
All critical components of Reliance Pacific Tanks undergo computerized Structural Non-Linear Material Finite Element Analysis at the design stage. Our design follows strictly to all Engineering Code of Practice applicable to Structural & Mechanical Disciplines.
FRP Sectional Panel Water Tanks
Tank Capacity
1000 to 500 000 litres Note: This capacity is based on standard industry design, however larger capacity tank is available based on our evaluation of installation site conditions.
Tank Size
Breath (B) and Length (L) : multiples of either 0.5 m or 1.0 m
Depth (D) : 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 m
Service
3.1 Service Pressure and Temperature For storage of water at atmospheric pressure and ambient temperature.
3.2 Ultra-violet Resistance * UV-Gard coated panels provide increased ultra-violet resistant to prevent colour fading and variety choice of Pantone colour to match.
Components
4.1 Panels
4.1.1 Material
-Resin : conforms to BS 3532 -Glass : conforms ro BS 3369, BS 3496, and BS 3749
4.1.2 Dimensions : 1 m x 1 m, 0.5 m x 1m
4.1.3 Fabrication
- Flanges : Single Flange 90°
- Land Width : > 60mm
- Hole Diameter : 14 mm
4.1.4 Physical Properties
Properties SS245:1995 Reliance
Tensile Strength (MN/m²) > 70 124.8
Bending Strength (MN/m²) > 100 214
Young's Modulus (MN/m²) > 6000 11890
Glass Content > 25 % 37 %
Barcol Hardness > 30 50
Water Absorption < 1.0 % 0.2 %
4.1.5 Performance
Roof Panel : supports 120-kg point load
1 meter Panel : withstand pressure ≥ 58.86 kN/m²
2 meters Panel : withstand pressure ≥ 117.72 kN/m²
3 meters Panel : withstand pressure ≥ 176.58 kN/m²
4 meters Panel : withstand pressure ≥ 235.44 kN/m²
4.1.6 Effect on Water
Non Cytotoxic conforming to SS 375
Tasteless and Odourless
Pass WHO 1984 Guideline value on Harmful metals for Drinking Water Quality.
Do not Support Microbiological of Coliform, Pseudomonas and Fungi.
4.2 Bolts & Nuts
4.2.1 Bolt Size : Nominal Ø 12 mm
4.2.2 Standard : ISO 898-1 & ISO 898-2
4.2.3 Material : Hot Dipped Galvanized Mild Steel SS 117 or equivalent
- used for assembly of panel & in area exposed externally Stainless Steel SS 304
- used in areas in contact with water
4.3 Sealing Materials
Non-cytotoxic conforming to SS 375
Permanent Compressive Strain <4%
Type for assembly of
- Roof Panels : PE Foam
- Wall & Base Panels : Nitrile Foam
4.4 Supports for Panel
4.4.1 Reinforcement System for Panels
- Type I : External Support
- Type II : Tie Rod
- Type III : Internal Stays
4.4.2 Elements of external support are Hot Dipped Galvanized Mild Steel
4.4.3 Elements of internal support are SS 304
4.4.4 Roof thrust pole material is uPVC
4.5 Pipe Connections
4.5.1 Piping Openings : The dimensions comply with BS 4504 for flanges and BS 21 for threads. Other standards can be requested upon our agreement.
4.5.2 Buyer is responsible to provide us pipe openings requirements prior to our delivery.
4.5.3 Nozzles
- Sizing : 50 mm ~ 200 mm
- Quantity : Inlet, Outlet, Overflow, Balancing and Warning - One of each per tank/compartment
- Material : Hot Dipped Galvanized Mild Steel
- Exception : Whenever a flat panel is provided nozzle will be omitted.
4.6 Air Vent
Nominal Ø : 100, 150 mm
Material : Synthetic Resin
4.7 Manhole Hatch
Nominal Ø : 600 mm internal opening
Material : GRP
Hinges : Aluminium alloy
4.8 Internal And External ladder
Provided for tanks with depth 1.5 m or more Material
: Internal ladder
- Aluminium
- SS 304 * : External ladder
- Hot Dipped Galvanized Mild Steel
- Aluminium *
4.9 Water Level Indicators
Graduated scale type attached to the side of tank complete with floats, pulleys, cord, weighted pointers and scale graduated in metric suiting depth of tank.
Steel Foundation
5.1 Finishing
5.1.1 1 coat of Black Iron Oxide
5.1.2 5.1.2 Hot Dipped Galvanized *
Concrete Plint (by others)
Height : > 450 mm
Width : 200 mm Length : Tank Nominal
Length (L) or Breath (B) plus 200 mm
If you have any enquires or questions regarding our services, please contact us by calling or e-mailing us and we’ll get back to you as soon as possible.
Reliance Pacific Tanks Sdn Bhd (446107-K)
6F-29 & 6F-30, Pusat Perdagangan IOI
Bandar Puchong Jaya, Bt 9, Jalan Puchong
47100 Puchong, Selangor D.E., Malaysia
Tel : + 603 8076 2886
Fax : + 603 8076 8861
Email : sales@rptanks.com
